Experimental and numerical studies of ballistic resistance of hybrid sandwich composite body armor

被引:1
|
作者
Khalaf, Waad Adnan [1 ]
Hamzah, Mohsin Noori [1 ]
机构
[1] Univ Technol Iraq, Mech Engn Dept, Alsinaa St, Baghdad 10066, Iraq
来源
OPEN ENGINEERING | 2024年 / 14卷 / 01期
关键词
ballistic impact; 7.62 x 39 mm bullet; hybrid sandwich armor; energy absorption; back face signature; MECHANICAL-PROPERTIES; PERFORMANCE; BEHAVIOR; MICROSTRUCTURE; DESIGN; PLATES; MODEL; PANEL;
D O I
10.1515/eng-2022-0543
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Defense mechanisms remain important and indispensable due to the different types of pistols and ordnance besides many guns. Hybrid composite sandwich panels are an attractive focus because of their ingrained characteristics, such as high stuffiness and high energy absorption. Hybrid composite sandwich panels are among the most important in armoring various structures. Despite the high density of these panels, they have significant qualities that qualify them to be the first selection for use in armored vehicles or body armor. Recently, there have been several types of structures, and selecting the appropriate structure as armor against the projectiles is very important. The study subjected three samples to the ballistic impact test using a 7.62 x 39 mm bullet. The first sample, S1, consists of ultra high molecular weight polyethylene (UHMWPE)/epoxy, unfilled honeycomb core, Kevlar/epoxy, unfilled honeycomb core, Kevlar/epoxy, and UHMWPE/epoxy; the second sample, S2, comprises Kevlar/epoxy, unfilled honeycomb core, Kevlar/epoxy, unfilled honeycomb core, and UHMWPE/epoxy, and the third sample, S3, comprises Al2O3, Kevlar/epoxy, unfilled honeycomb core, carbon/epoxy, unfilled honeycomb core, and carbon/epoxy. ABAQUS software was used to evaluate the ballistic impact numerically, and after that, the study examined the same armor samples experimentally. The results manifested that only the armor S3 succeeded in stopping the bullet. This is attributed to the structure of the cores, which helps compress and accumulate the cells under the projectile. The speeds of the bullet after penetration (residual velocity; VR) were 748.5 and 715.3 m/s for S1 and S2 armors, respectively, where the back face signature for S3 was 1.5 mm, which is optimum and within the allowed range. The total energy absorption of these armors S1, S2, and S3 is 344.65, 539.04, and 2585.66 J. Furthermore, the highest deviation between numerical and experimental approaches is about 2.04% in the VR.
引用
收藏
页数:18
相关论文
共 50 条
  • [1] BALLISTIC PERFORMANCE OF SANDWICH COMPOSITE ARMOR SYSTEM
    Alam, Shah
    Nguyen, Diem
    PROCEEDINGS OF ASME 2021 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION (IMECE2021), VOL 12, 2021,
  • [2] BALLISTIC PERFORMANCE OF SANDWICH COMPOSITE ARMOR SYSTEM
    Alam, Shah
    Shakar, Samhith
    PROCEEDINGS OF THE ASME 2020 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2020, VOL 12, 2020,
  • [3] Ballistic resistance of hybrid-cored sandwich plates: Numerical and experimental assessment
    Ni, C. Y.
    Li, Y. C.
    Xin, F. X.
    Jin, F.
    Lu, T. J.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2013, 46 : 69 - 79
  • [4] Numerical Modeling on Ballistic Impact Analysis of the Segmented Sandwich Composite Armor System
    Alam, Shah
    Aboagye, Papa
    APPLIED MECHANICS, 2024, 5 (02): : 340 - 361
  • [5] Experimental and numerical investigation of hybrid armor against a ballistic impact
    Ahmed, Payman S.
    Fadhil, Basim M.
    Mshir, Samir
    Salar, Mohamed
    MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES, 2021, 17 (04) : 701 - 715
  • [6] Investigation of composite sandwich plates for ballistic armor application
    Kumar, K. Nikhil
    Kumar, C. H. Bharat
    Kumar, K. Hemanth
    Noolvi, Basavaraj
    MATERIALS TODAY-PROCEEDINGS, 2020, 27 : 1738 - 1742
  • [7] Finite Element Analysis of the Ballistic Impact on Auxetic Sandwich Composite Human Body Armor
    Shah, Imtiaz Alam
    Khan, Rafiullah
    Koloor, Seyed Saeid Rahimian
    Petru, Michal
    Badshah, Saeed
    Ahmad, Sajjad
    Amjad, Muhammad
    MATERIALS, 2022, 15 (06)
  • [8] Ballistic impact experiments and modelling of sandwich armor for numerical simulations
    Shanel, Vit
    Spaniel, Miroslav
    37TH NATIONAL CONFERENCE ON THEORETICAL AND APPLIED MECHANICS (37TH NCTAM 2013) & THE 1ST INTERNATIONAL CONFERENCE ON MECHANICS (1ST ICM), 2014, 79 : 230 - 237
  • [9] Numerical simulation of composite armor subjected to ballistic impact
    NayanPundhir
    Goyal, Deepak
    Singh, Pradyut
    Pathak, Himanshu
    Zafar, Sunny
    MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 696 - 703
  • [10] Ballistic tests of lightweight hybrid composites for body armor
    Yanen, Cenk
    Solmaz, Murat Yavuz
    MATERIALS TESTING, 2019, 61 (05) : 425 - 433