EFFECT OF MATERIAL, ADHESIVE AND LOADING ON THE STIFFNESS OF WOODEN DOWEL JOINTS

被引:3
|
作者
Karaman, Abdurrahman [1 ]
Yildirim, Mehmet Nuri [2 ]
机构
[1] Usak Univ, Banaz Vocat Sch, Dept Forestry, Usak, Turkiye
[2] Karabuk Univ, Safranbolu Sefik Yilmaz Dizdar Vocat Sch, Dept Interior Design, Karabuk, Turkiye
关键词
Elastic stiffness; dowel joints; adhesive; compression; tension; MORTISE; PARAMETERS; FURNITURE; STRENGTH; ELEMENTS;
D O I
10.37763/wr.1336-4561/68.4.768780
中图分类号
TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];
学科分类号
0805 ; 080502 ; 0822 ;
摘要
The objective of this study was to evaluate the effects of selected parameters, such as type of loading (compression and tension), the wooden dowel species, and the adhesives type on the joint stiffness. Beech, oak, and Scots pine woods were used as wooden dowel material, and polyvinylacetate (PVAc) and polyurethane (PUR) adhesives were used as adhesive agents. Elastic stiffness on diagonal tension and compression tests were applied on 120 pieces of test samples prepared. The results showed that there was found out that the highest average elastic stiffness value of 656 Nm/rad was achieved in the oak dowel joints bonded with PVAc adhesive under compression loading. The lowest average value of 293 Nm/rad was found in the Scots pine dowel joints subjected to compression stress using PUR adhesive. On average, the elastic stiffness of the oak dowel joints bonded with PVAc adhesive was 17% higher than the elastic stiffness of the Scots pine dowel joints bonded with PUR adhesive. The influence of the wooden dowel species and the adhesive type were found statistically significant.
引用
收藏
页码:768 / 780
页数:13
相关论文
共 50 条
  • [1] Effect of Selected Factors on Stiffness of Dowel Joints
    Zaborsky, Vladimir
    Sikora, Adam
    Gaff, Milan
    Kasickova, Vaclava
    Boruvka, Vlastimil
    BIORESOURCES, 2018, 13 (03): : 5416 - 5431
  • [2] Effect of selected factors on stiffness of dowel joints
    Záborský V.
    Sikora A.
    Gaff M.
    Kašičková V.
    Boruvka V.
    BioResources, 2019, 13 (03) : 5416 - 5431
  • [3] Effect of the Dowel Length, Dowel Diameter, and Adhesive Consumption on Bending Moment Capacity of Heat-treated Wood Dowel Joints
    Georgescu, Sergiu
    Varodi, Anca Maria
    Racasan, Sergiu
    Bedelean, Bogdan
    BIORESOURCES, 2019, 14 (03) : 6619 - 6632
  • [4] OUT-OF-PLANE STRENGTH AND STIFFNESS OF DOWEL JOINTS
    ECKELMAN, CA
    FOREST PRODUCTS JOURNAL, 1979, 29 (08) : 32 - 38
  • [5] Experimental evaluation of dowel-type timber joints with wooden dowels
    Teodorescu, Ioana
    Pereira, Barbara
    Aquino, Caroline D.
    Branco, Jorge M.
    PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 2020, 173 (12) : 927 - 938
  • [6] Load-Carrying Capacity and Stiffness of Softwood Wooden Dowel Connections
    Frontini, Filippo
    Siem, Jan
    Renmaelmo, Roald
    INTERNATIONAL JOURNAL OF ARCHITECTURAL HERITAGE, 2020, 14 (03) : 376 - 397
  • [7] Effect of material hybridization on the strength of scarf adhesive joints
    Alves, D. L.
    Campilho, R. D. S. G.
    Moreira, R. D. F.
    Silva, F. J. G.
    Cardoso, M. G.
    29TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING (FAIM 2019): BEYOND INDUSTRY 4.0: INDUSTRIAL ADVANCES, ENGINEERING EDUCATION AND INTELLIGENT MANUFACTURING, 2019, 38 : 1244 - 1251
  • [8] Study on the Effect of Strain Rate of Adhesive Material on the Stress State in Adhesive Joints
    Goda, Yasuhiro
    Sawa, Toshiyuki
    JOURNAL OF ADHESION, 2011, 87 (7-8): : 766 - 779
  • [9] Effect of moisture absorption of adhesive and CFRP on the failure of composite material adhesive joints
    Qin G.-F.
    Mi P.-W.
    Na J.-X.
    Jiaotong Yunshu Gongcheng Xuebao/Journal of Traffic and Transportation Engineering, 2021, 21 (05): : 149 - 160
  • [10] EFFECT OF ADHESIVE STIFFNESS AND THICKNESS ON STRESS DISTRIBUTIONS IN STRUCTURAL FINGER JOINTS
    GROOM, LH
    LEICHTI, RJ
    JOURNAL OF ADHESION, 1994, 44 (1-2): : 69 - 83