Facile route for preparation of cuprous oxide/copper/cupric oxide nanoparticles by using simultaneous electrochemical and reduction reaction

Cuprous oxide/copper/cupric oxide nanoparticles were synthesized through a hybrid process involving anodic dissolution and a controlled redox reaction between NaOH and glucose in the solution. The study demonstrates the structural manipulation of the material by varying the reaction components within the solution. Morphology, structural analyses using SEM (Scanning Electron Microscope), EDX (Energy-dispersive X-ray spectroscopy), TEM (Transmission Electron Microscope), FTIR (Fourier Transform Infrared Spectroscopy), XRD (X-ray diffraction), and XPS (X-ray photoelectron spectroscopy) unveiled the tunability of the material's structure based on the reaction components. Nitrogen adsorption analysis employing the Brunauer-Emmett-Teller (BET) equation confirmed the material's porosity, while Dynamic Light Scattering (DLS) measurements provided insights into the materials' hydrodynamic size and zeta potential. The results demonstrated that by increasing the glucose/NaOH ratio during the reaction, the different structures and morphologies of the distinct products were obtained from the clustering of small nanoparticles to cubic shape and flower-like structure. Antibacterial activity tests conducted on various bacterial strains showed a correlation between the morphology and structure of the material and its antibacterial properties. The highest substantial antibacterial efficacy against all tested bacterial strains at a dosage of 100 mu g/L was obtained for the samples with clustering morphology, whereas the remaining materials showed no discernible antibacterial effect against one of the studied bacteria. The results also demonstrated that the sample with a clustering structure exhibited superior antibacterial properties when dispersed in water containing dimethylsulfoxide.