Identification of Key Brittleness Factors for the Lean-Green Manufacturing System in a Manufacturing Company in the Context of Industry 4.0, Based on the DEMATEL-ISM-MICMAC Method

In the context of Industry 4.0, the lean-green manufacturing system has brought many advantages and challenges to industrial participants. Security is one of the main challenges encountered in the new industrial environment, because smart factory applications can easily expose the vulnerability of manufacturing and threaten the operational security of the whole system. It is difficult to address the problem of the brittleness factor in manufacturing systems. Therefore, building on vulnerability theory, this study proposes a vulnerability index system for lean-green manufacturing systems in a manufacturing company in the context of Industry 4.0. The index has four dimensions: human factors, equipment factors, environmental factors, and other factors. The Decision-Making Trial and Evaluation Laboratory (DEMATEL) approach was used to calculate the degree of influence, the degree of being influenced, and the centrality and causes of the factors. The causal relationships and key influences between the factors were identified. Then, the dependence and hierarchy of each of the key influencing factors were analyzed using the Matrix-Based Cross-Impact Multiplication Applied to Classification (MICMAC) and Interpretative Structural Model (ISM) methods, and a hierarchical structural model of the factors was constructed. Finally, an intelligent manufacturing system that produces a micro-acoustic material and device was used as an example to verify the accuracy of the proposed method. The results show that the method not only identifies the key brittleness factors in a lean-green manufacturing system but can also provide a guarantee for the safe operation of a manufacturing system. This study provides theoretical guidance for the effective management of intelligent manufacturing systems; moreover, it lays a foundation and provides a new methodology for assessing the vulnerability of manufacturing systems.