Voltage-sag mitigation by stability-constrained partitioning scheme

Microgrids have the ability to function in islanded or grid-connected modes of operation. The increased penetration of inverter-based Distributed Energy Resources (DERs) in the system promotes the concept of partitioning the system into self-governing and self-adequate microgrids. Most of the partitioning tech-niques determine virtual boundaries and did not consider the survivability of the constructed microgrids. In this paper, a stability-constrained partitioning scheme is proposed based on small-signal stability to ensure microgrids' survivability when physically partitioned. Moreover, a sensitivity analysis of active power droop gain is utilized to define a novel index for the microgrid's marginal stability. The application targeted in this paper is the mitigation of voltage-sag events caused by low impedance faults. The system will be partitioned into clusters of survivable microgrids during faults to isolate the faulted zone that caused the voltage-sag event. By isolating the voltage-sag origin from the rest of the system, voltage -sag mitigation is accomplished. Also, a microgrid re-connection method is proposed. This method allows multiple droop-controlled DERs to adjust the frequency, phase, and magnitude of their output voltages to facilitate seamless re-connection of microgrids. Simulation results are given that show a seamless re-connection of two different microgrids when the proposed method is utilized. The effectiveness of the proposed mitigation algorithm is validated using a modified IEEE 33-bus distribution system simulated on MATLAB/SIMULINK platform.(c) 2022 THE AUTHORS. Published by Elsevier BV on behalf of Faculty of Engineering, Ain Shams Uni-versity. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/ by-nc-nd/4.0/).