Epoxy matrix nano composites: modulus, strength and ductility enhancement through auxeticity of α-Cristobalite filler

被引：0
|
作者：
Guden, Mustafa [1 ]
Ulker, Sevkan [1 ]
Movahedi, Nima [2 ]
机构：
[1] Izmir Inst Technol, Dept Mech Engn & Mat Sci & Engn, Izmir, Turkiye
[2] Univ Newcastle, Coll Engn Sci & Environm, Ctr Mass & Thermal Transport Engn Mat, Callaghan, NSW, Australia
来源：
MATERIALS LETTERS | 2023年 / 349卷
关键词：
Deformation and fracture; Nanocomposites; Nanoparticles; Polymers; CARBON-FIBER; CRISTOBALITE;
D O I：
10.1016/j.matlet.2023.134759
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The negative Poisson's ratio (NPR) nano-size & alpha;-Cristobalite particle/epoxy composites were prepared and tensile tested. The elastic modulus and strength of the composites were improved as the particle volume fraction increased from 0 to 0.02. Unlike the conventional particle reinforced composites, the fracture strain increased with the nano & alpha;-Cristobalite addition, an effect which was ascribed to the intrinsic NPR behavior of the filler.
引用
收藏
页数：4
相关论文
共 50 条
  • [1] Enhancement of strength and ductility by interfacial nano-decoration in carbon nanotube/aluminum matrix composites
    Guo, Baisong
    Chen, Yiqiang
    Wang, Zhangwei
    Yi, Jianhong
    Ni, Song
    Du, Yong
    Li, Wei
    Song, Min
    CARBON, 2020, 159 : 201 - 212
  • [2] Effect of the nano-filler content on the compressive strength of continuous carbon fibre/epoxy matrix composites
    Mechin, P-Y
    Keryvin, V
    Grandidier, J-C
    COMPOSITES PART B-ENGINEERING, 2021, 224 (224)
  • [3] Towards strength-ductility enhancement of titanium matrix composites through heterogeneous grain structured Ti matrix design
    Wang, Shuai
    An, Qi
    Liu, WenQi
    Zhang, Rui
    Ma, ZiShuo
    Huang, LuJun
    Geng, Lin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 927
  • [4] Influence of nano graphene filler on hardness, impact strength and density of glass epoxy composites
    Srinivasaiah, Aswathanarayan Mangisetty
    Nagaraja, Santhosh
    Munipapanna, Aswatha
    Gopalakrishna, Sumana Bellary
    Krishnappa, Manjunath
    Venkataramaiah, Harish Hassan
    ENGINEERING REPORTS, 2024, 6 (12)
  • [5] Simultaneously enhanced strength and ductility of Al matrix composites through the introduction of intragranular nano-sized graphene nanoplates
    Han, Tielong
    Wang, Fucheng
    Li, Jiajun
    Zhao, Naiqin
    He, Chunnian
    COMPOSITES PART B-ENGINEERING, 2021, 212
  • [6] Achieving simultaneous enhancement of strength and ductility in Al matrix composites by employing the synergetic strengthening effect of micro- and nano-SiCps
    Liu, Kan
    Su, Yishi
    Wang, Xiaozhen
    Cai, Yunpeng
    Cao, He
    Ouyang, Qiubao
    Zhang, Di
    COMPOSITES PART B-ENGINEERING, 2023, 248
  • [7] Flexural strength enhancement in carbon-fiber epoxy composites through graphene nano-platelets coating on fibers
    Srivastava, Alok K.
    Gupta, Vidit
    Yerramalli, Chandra S.
    Singh, Aparna
    COMPOSITES PART B-ENGINEERING, 2019, 179
  • [8] Measurement of interfacial bonding strength between the micro-spherical filler and the matrix in microcapsule/epoxy composites
    Dou, Guijing
    Zhao, Lei
    Xia, Weihai
    Jiang, Hanyang
    Piao, Zhongyu
    Peng, Guangjian
    COMPOSITES SCIENCE AND TECHNOLOGY, 2025, 265
  • [9] Enhanced breakdown strength of epoxy composites by constructing dual-interface charge barriers at the micron filler/epoxy matrix interface
    Yang, Kerong
    Zhao, Yushun
    Liu, Xiaoqing
    COMPOSITES PART B-ENGINEERING, 2024, 283
  • [10] Analytical models of the strength and ductility of CNT reinforced metal matrix nano composites under elevated temperatures
    Song, Shutao
    He, Xu
    Zhou, Qiang
    Ren, Luyang
    Chen, Quanfang
    Bai, Yuanli
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 813
12345