Stiffness analysis and optimization of an asymmetric 3T1R parallel mechanism

被引：0
|
作者：
Zhu, Wei [1 ,2 ]
Ma, Zhilong [1 ]
Ma, Zhiyuan [1 ]
Shen, Huiping [1 ]
机构：
[1] Changzhou Univ, Coll Mech & Engn, Changzhou, Peoples R China
[2] Changzhou Univ, Sch Mech Engn & Rail Transit, Changzhou 213164, Peoples R China
来源：
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE | 2024年 / 238卷 / 08期
基金：
中国国家自然科学基金;
关键词：
Parallel mechanism; stiffness modeling; optimization design; differential evolution algorithm; MANIPULATORS;
D O I：
10.1177/09544062231198323
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In this paper, an asymmetric 3T1R parallel mechanism is proposed that has higher stiffness in specific directions. The stiffness model is established by using virtual spring theory, and the Cartesian stiffness matrix is obtained. The stiffness performance evaluation indices are deduced by the dimensionless parameterization method. Under the condition of satisfying the high-speed performance and dexterity, the optimal size parameters of the mechanism are got by using the DE (differential evolution) algorithm with stiffness performance as the index. By comparing the stiffness performance atlases before and after the optimization, it is showed that the stiffness performance has been improved and the reachable workspace has been increased. The results verify the feasibility of the proposed performance indices and optimization algorithm.
引用
收藏
页码：3391 / 3403
页数：13
相关论文
共 50 条
  • [1] Performance Optimization of 3T1R Parallel Mechanism Based on PCA/PSO
    Pu Z.
    Pan Y.
    Guo J.
    Cheng Y.
    Bai Y.
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2024, 55 (06): : 404 - 413
  • [2] Design and Kinematics Performance Analysis of a 3T1R Parallel Mechanism
    Zhu W.
    Gu K.
    Wang C.
    Liu X.
    Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2018, 29 (01): : 14 - 21
  • [3] Elastodynamic optimization of a 3T1R parallel manipulator
    Alessandro, Cammarata
    Rosario, Sinatra
    MECHANISM AND MACHINE THEORY, 2014, 73 : 184 - 196
  • [4] Kinematic Analysis and Optimal Design of a New 3T1R Parallel Mechanism
    Malekpour, Mohammad
    Kaviany, Farid
    FesharakiFard, Rasul
    Khosravi, Mohammad A.
    2019 7TH INTERNATIONAL CONFERENCE ON ROBOTICS AND MECHATRONICS (ICROM 2019), 2019, : 544 - 551
  • [5] Kinematic Analysis and Optimal Design of a 3T1R Type Parallel Mechanism
    Kim, Sung Mok
    Kim, Wheekuk
    Yi, Byung-Ju
    ICRA: 2009 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS 1-7, 2009, : 3737 - +
  • [6] Kinematics Analysis and Design Optimization of Novel 3T1R Parallel Manipulator
    Yang G.
    Wu C.
    Chen C.
    Wang Y.
    Zhang C.
    1600, Chinese Society of Agricultural Machinery (48): : 386 - 394and420
  • [7] Design and analysis of a partially decoupled generalized parallel mechanism for 3T1R motion
    Tian, Chunxu
    Fang, Yuefa
    Ge, Q. J.
    MECHANISM AND MACHINE THEORY, 2019, 140 : 211 - 232
  • [8] The type of comprehensive analysis of 3T1R of four degrees of freedom parallel mechanism
    Hu, Xing-Wei
    Xia, Guang-Lan
    Yin, Bao-Lin
    Yu, Feng
    DESIGN, MANUFACTURING AND MECHATRONICS (ICDMM 2015), 2016, : 432 - 439
  • [9] Design and Kinematic Analysis of Zero Coupling and Partially Decoupled 3T1R Parallel Mechanism
    Shen H.
    Xu Z.
    Xu K.
    Deng J.
    Yang T.
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2019, 50 (04): : 382 - 392
  • [10] Design and Analysis for Partially Decoupled 3T1R Parallel Mechanism with Low Coupling Degree
    Shen H.
    Xu Z.
    Xu K.
    Deng J.
    Yang T.
    Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2019, 50 (02): : 373 - 383and419
12345