A Low Frequency Noise Source Localization and Identification Method Based on a Virtual Open Spherical Vector Microphone Array

Aiming at the problem of poor spatial resolution of low-frequency noise sources in a small-aperture spherical microphone array (SMA), this paper proposes a method for localizing and identifying low-frequency noise sources based on virtual-vector open SMA ('p+v' joint processing method of pressure and velocity). Firstly, a virtual open SMA with a larger aperture is obtained using a virtual array extrapolation method. In this method, the virtual SMA and the actual SMA are regarded as a dual-radius SMA, and velocity information is obtained using finite difference elements of the same direction (azimuth and elevation) array of the virtual and actual SMA. At the same time, the sound pressure at the velocity position is obtained using the virtual SMA extrapolation method and the virtual vector array element SMA, whereby both velocity and sound pressure information is obtained. Finally, the vector signal processing technology is introduced into the generalized inverse beamforming algorithm (GIB). After determining the vector transfer function of the 'p+v' joint processing mode, a low-frequency-noise-source localization and identification method based on the vector signal processing GIB is proposed. The simulation and experiment results show that a virtual SMA with a large aperture can be obtained using a virtual array extrapolation method, and the GIB with sound pressure and velocity joint processing has a better spatial resolution.