The high-frequency phenomenon of copper clad aluminum wires which are lower the alternating current resistance than copper solid wires, and the application of copper clad aluminum wires to the electrical equipment

被引:0
|
作者
Ueda, Katsuhiko [1 ,3 ]
Hung, Chefen [2 ]
机构
[1] Ueda Lb, Numazu, Japan
[2] TAYA Elect Wire & Cable, Tainan, Taiwan
[3] Ueda Lb, 4-27 Minami Hongo cho, Numazu 4100815, Japan
关键词
copper clad aluminum wires; eddy current loss; TUBULAR CYLINDRICAL CONDUCTORS; INTERNAL IMPEDANCE;
D O I
10.1002/eej.23435
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
The paper is proposed approximate formulas of the ac resistance of lead wires and coils which made by using copper clad aluminum (CCA) wires. There are the frequency range that the ac resistance of CCA wires is lower than it of cupper solid wires for lead wires and coils of an electrical equipment. It is shown that the application of CCA wires is economical as comparing with copper solid wires, if the design is due to successful calculation in the electrical equipment. The measured resistance is compared with the formula. CCA wires is an example of multiple conductors which shall be expected to apply in future.
引用
收藏
页数:16
相关论文
共 19 条
  • [1] AC Resistance of Copper Clad Aluminum Wires
    Guan, Ning
    Kamidaki, Chihiro
    Shinmoto, Takashi
    Yashiro, Ken'ichiro
    [J]. IEICE TRANSACTIONS ON COMMUNICATIONS, 2013, E96B (10) : 2462 - 2468
  • [2] Theoretical Analysis of AC Resistance of Coil Made by Copper Clad Aluminum Wires
    Kamidaki, C.
    Guan, N.
    [J]. PIERS 2013 STOCKHOLM: PROGRESS IN ELECTROMAGNETICS RESEARCH SYMPOSIUM, 2013, : 1730 - 1734
  • [3] COPPER CLAD ALUMINUM IN ELECTRICAL APPLICATION
    READ, DW
    [J]. SAE TRANSACTIONS, 1968, 77 : 135 - &
  • [4] Study of the intermetallic growth in copper-clad aluminum wires after thermal aging
    Gueydan, Antoine
    Domenges, Bernadette
    Hug, Eric
    [J]. INTERMETALLICS, 2014, 50 : 34 - 42
  • [5] Impact of hardening law on the FEM prediction of residual stresses in copper-clad aluminum wires
    Dashti, Alireza
    Keller, Clement
    Vieille, Benoit
    Guillet, Alain
    Gallo, Calogero
    Habraken, Anne-Marie
    Duchene, Laurent
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 131 (02): : 637 - 645
  • [6] Study by nanoindentation of the influence of the manufacturing process on the mechanical properties of Copper-Clad Aluminum wires
    Eve, Sophie
    Keller, Clement
    Hug, Eric
    [J]. MATERIAUX & TECHNIQUES, 2022, 110 (02):
  • [7] Impact of hardening law on the FEM prediction of residual stresses in copper-clad aluminum wires
    Alireza Dashti
    Clément Keller
    Benoit Vieille
    Alain Guillet
    Calogero Gallo
    Anne-Marie Habraken
    Laurent Duchêne
    [J]. The International Journal of Advanced Manufacturing Technology, 2024, 131 : 637 - 645
  • [8] Study on the microstructure characteristics of melting marks in copper-clad aluminum wires under overcurrent faults
    Wang, Weifeng
    Ji, Xiaohan
    Zhang, Fangzhi
    Zhao, Xuanchong
    Gui, Xiaoyun
    He, Di
    Wang, Lin
    [J]. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2024, 149 (01) : 345 - 357
  • [9] Secondary creep stage behavior of copper-clad aluminum thin wires submitted to a moderate temperature level
    Gueydan, Antoine
    Hug, Eric
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 709 : 134 - 138
  • [10] THE DRAWING PROCESS OF THE WIRES OF COPPER AND ALUMINUM: EVOLUTION OF THE MICROSTRUCTURE AND (MECHANICAL/ELECTRICAL) PROPERTIES
    Zidani, M.
    Hadid, M. D.
    Messaoudi, S.
    Dendouga, F.
    Bessais, L.
    Baira, F.
    Bayarassou, M.
    Helbert, A. L.
    Mathon, M. H.
    Baudin, T.
    [J]. METAL 2014: 23RD INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2014, : 442 - 446