共 50 条
Energy-Exergy-Economic (3E) -Optimization Analysis of a Solar System for Cooling, Heating, Power, and Freshwater Generation System for a Case Study Using Artificial Intelligence (AI)
被引:0
|作者:
Assari, Mohammad Reza
[1
,2
]
Assareh, Ehsanolah
[3
,4
]
Agarwal, Neha
[4
]
Setareh, Milad
[1
]
Alaei, Nazanin
[1
]
Moradian, Ali
[1
]
Lee, Moonyong
[4
]
机构:
[1] Jundi Shapur Univ Technol, Mech Engn Dept, Dezful 64615334, Iran
[2] Alzahra Univ, Fac Engn, Dept Mech Engn, Tehran 1993893973, Iran
[3] Islamic Azad Univ, Dept Mech Engn, Dezful Branch, Dezful 313, Iran
[4] Yeungnam Univ, Sch Chem Engn, Gyongsan 38541, South Korea
来源:
基金:
新加坡国家研究基金会;
关键词:
solar energy;
parabolic trough solar collector;
exergy efficiency;
cost rate;
ORGANIC RANKINE-CYCLE;
MULTIOBJECTIVE OPTIMIZATION;
PARABOLIC TROUGH;
EXERGOECONOMIC ANALYSIS;
DESALINATION UNIT;
HYDROGEN;
ELECTROLYZER;
ELECTRICITY;
COLLECTORS;
D O I:
10.3390/en16134873
中图分类号:
TE [石油、天然气工业];
TK [能源与动力工程];
学科分类号:
0807 ;
0820 ;
摘要:
In this research, analysis of a cogeneration system harnessing solar energy with the purpose of producing electricity and freshwater is carried out. A parabolic trough collector (PTC), a reverse osmosis (RO) desalination system and a steam Rankine cycle are considered as the primary modules of the system. Optimization is conducted on the basis of the Non-Dominated Sorting Genetic Algorithm II (NSGA-II), while the Engineering Equation Solver (EES) is used to cope with the presented thermodynamic model. Sensitivity analysis of different key parameters including pump and turbine efficiencies, pump and turbine inlet pressures, evaporator pinch point and inlet temperature and, finally, solar radiation are calculated. A location with high solar energy potential is selected to explore the feasibility of installing the designed system. The case study results show that the maximum level of freshwater production happens during June and July due to an increased sunlight and ambient temperature. Annual electricity and distilled water production of 260,847.6586 MW and 73,821.34 m(3) are calculated, respectively. Furthermore, the optimum results regarding the cost rate and exergy efficiency were found to be 35.26 $/h and 12.02%, respectively.
引用
下载
收藏
页数:17
相关论文