High-Hardness High-Fracture-Toughness B4C-TiB2 Composite Produced by Reactive Hot Pressing

被引：3

作者：

Asghar, Zahid ^{[1
]}

Aziz, Taha ^{[1
]}

Khan, Abdul Rehman ^{[1
]}

Shah, Attaullah ^{[2
]}

Waqas, Hassan ^{[1
]}

Ali, Fahad ^{[3
]}

Rasul, H. Tanveer ^{[1
]}

Khan, M. Fayaz ^{[1
]}

机构：

[1] Pakistan Inst Nucl Sci & Technol, Mat Div, PO Nilore, Islamabad, Pakistan

[2] Natl Inst Laser & Opt, Islamabad, Pakistan

[3] Pakistan Inst Engn & Appl Sci, DMME, Islamabad, Pakistan

来源：

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2023年 / 32卷 / 16期

关键词：

boron carbide; composite; high hardness-high toughness; hot pressing; in situ; titanium boride; MECHANICAL-PROPERTIES; BORON-CARBIDE; MICROSTRUCTURE; B4C; DEFORMATION; STRENGTH; BEHAVIOR;

D O I：

10.1007/s11665-022-07660-0

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

B4C-TiB2 composite was synthesized by in situ reaction of TiO2 , C, and B4C during vacuum hot pressing. The composition of the composite was varied from 0 to 20 vol.% TiB2. The reaction step was controlled to produce homogenous distribution of TiB2 in B4C matrix with - 100% density. The hardness, bending strength, and fracture toughness of B4C monolith and B4C-TiB2 composite were evaluated. B4C-TiB2 composite with 20 vol.% TiB2 content showed 39.4 GPa hardness, 800 MPa bending strength, and 9.8 MPa.m(1/2) fracture toughness. The increase in hardness, bending strength, and fracture toughness in B4C-TiB2 composite sample was 29, 56, and 292%, respectively, as compared to B4C monolith. Improvement in hardness and bending strength is attributed to the smaller grain size, i.e., 1.3 mu m. The increase in fracture toughness is due to the presence of free carbon at the B4C-TiB2 interface, which creates microcracks at the interfacial boundary.

引用

页码：7225 / 7233

页数：9

共 50 条

[1] High-Hardness High-Fracture-Toughness B4C-TiB2 Composite Produced by Reactive Hot Pressing
Zahid Asghar
Taha Aziz
Abdul Rehman Khan
Attaullah Shah
Hassan Waqas
Fahad Ali
H. Tanveer Rasul
M. Fayaz Khan
Journal of Materials Engineering and Performance, 2023, 32 : 7225 - 7233
[2] B4C-TiB2 Composites via Reactive Hot Pressing
Sahin, Filiz Cinar
Yesilcubuk, S. Alper
HIGH TEMPERATURE MATERIALS AND PROCESSES, 2009, 28 (05) : 277 - 283
[3] Integrated preparation of B4C-TiB2 multilayer graded ceramics with high hardness and high toughness
Tan, Wenkang
Zou, Ji
Wang, Weimin
Ji, Wei
Fu, Zhengyi
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2024, 21 (05) : 3453 - 3461
[4] High strength-high toughness B4C-TiB2 composites
Skorokhod, V
Krstic, VD
JOURNAL OF MATERIALS SCIENCE LETTERS, 2000, 19 (03) : 237 - 239
[5] High strength B4C-TiB2 composites fabricated by reaction hot-pressing
Yamada, S
Hirao, K
Yamauchi, Y
Kanzaki, S
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2003, 23 (07) : 1123 - 1130
[6] High toughness TiB2-Al2O3 composite ceramics produced by reactive hot pressing with fusible components
Popov, A. Yu.
Sivak, A. A.
Borodianska, H. Yu.
Shabalin, I. L.
ADVANCES IN APPLIED CERAMICS, 2015, 114 (03) : 178 - 182
[7] Synthesis and properties of hot pressed B4C-TiB2 ceramic composite
Yue, XinYan
Zhao, ShuMao
Lue, Peng
Chang, Qing
Ru, HongQiang
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (27-28): : 7215 - 7219
[8] Effect of TiB2 particles on microstructure and mechanical properties of B4C-TiB2 ceramics prepared by hot pressing
Guo, Wenchao
He, Qianglong
Wang, Aiyang
Tian, Tian
Liu, Chun
Hu, Lanxin
Wang, Weimin
Wang, Hao
Fu, Zhengyi
CERAMICS INTERNATIONAL, 2023, 49 (03) : 4403 - 4411
[9] B4C-TiB2 composites fabricated by hot pressing TiC-B mixtures: The effect of B excess
Zhao, Jun
Tang, Chenjun
Li, Qinggui
Liu, Zetan
Ran, Songlin
CERAMICS INTERNATIONAL, 2022, 48 (09) : 11981 - 11987
[10] Research progress of B4C-TiB2 composite ceramics
Ran, Song-Lin
Wang, De-Wen
Sun, Hui-Feng
Fan, Chuan-Gang
Rengong Jingti Xuebao/Journal of Synthetic Crystals, 2013, 42 (10): : 2150 - 2155

← 1 2 3 4 5 →