Design and Experimental Study of Core Bit for Hard Rock Drilling in Deep-Sea

被引:5
|
作者
Li, Xingchen [1 ,2 ]
Xiong, Liang [1 ,2 ]
Xie, Wenwei [1 ,2 ]
Gao, Ke [3 ]
Shao, Yutao [4 ]
Chen, Yunlong [5 ]
Yu, Yanjiang [1 ,2 ]
Kou, Beibei [1 ,2 ]
Lu, Qiuping [1 ,2 ]
Zeng, Jing [1 ,2 ]
Yu, Haoyu [1 ,2 ]
机构
[1] China Geol Survey, Guangzhou Marine Geol Survey, Guangzhou 510075, Peoples R China
[2] China Geol Survey, Natl Engn Res Ctr Gas Hydrate Explorat & Dev, Guangzhou 510075, Peoples R China
[3] Jilin Univ, Colledge Construct Engn, Changchun 130026, Peoples R China
[4] Chinese Acad Geol Sci, Inst Explorat Tech, Langfang 065000, Peoples R China
[5] Beijing Inst Explorat Engn, Beijing 100083, Peoples R China
关键词
ocean drilling; hard rock stratum; service life of bit; efficiency; ROP; WOB; DIAMOND BIT;
D O I
10.3390/jmse11020306
中图分类号
U6 [水路运输]; P75 [海洋工程];
学科分类号
0814 ; 081505 ; 0824 ; 082401 ;
摘要
The hard rock stratum will seriously affect the efficiency of deep-sea drilling and greatly increase the cost of drilling operations due to its complexity. In ocean drilling operations, the design of the bit is critical. Therefore, the core bit should be able to drill in a variety of formations, especially in hard rock stratum, with the function of reducing the need to change the bit due to formation changes and improving the drilling efficiency. In this paper, three different core bits were designed according to the hard rock stratum of the seabed: the roller bit, diamond bit and bionic bit. According to the test results, it was observed that: (1) It is fully proven that the roller core bit has the characteristics of stable drilling in hard strata, small torque and high drilling efficiency. The same method can realize the core in shallow soft strata through the setting of drilling parameters. (2) For the diamond bit, the field test data show that the new formula diamond bit has a good adaptability to the changing hard rock strata in this area, with an average rate of penetration (ROP) of 4.4 m/h and a bit life of 137.75 m. (3) For the bionic bit, field experiment data showed that drilling in the formation lithology was gray green tuff, which had a core recovery up to 100%. The average ROP was 1.35 m/h, and the highest ROP was 1.88 m/h. The design and experiment of three kinds of drill bits have effectively solved the technical problem of efficient drilling in deep-sea hard-rock stratum.
引用
收藏
页数:12
相关论文
共 50 条
  • [1] Design & Application of Diamond Bit to Drilling Hard Rock in Deep Borehole
    Jia Meiling
    Cai Jiapin
    Ouyang Zhiyong
    Shen Lina
    Wu Haixia
    Li Chun
    2014 INTERNATIONAL (CHINA) GEOLOGICAL ENGINEERING DRILLING TECHNOLOGY CONFERENCE (IGEDTC2014), 2014, 73 : 134 - 142
  • [2] Case study of core bit wear and its effect on core recovery and quality during deep-sea drilling expeditions
    Japan Agency for Marine-Earth Science and Technology, Japan
    Soc. Pet. Eng. - Brazil Offshore Conf., (68-76):
  • [3] DEEP-SEA DRILLING
    FINLAY, LW
    SCIENCE, 1973, 182 (4118) : 1194 - 1194
  • [4] DEEP-SEA DRILLING
    WHITE, SM
    GEOTIMES, 1979, 24 (01): : 21 - 23
  • [5] DEEP-SEA DRILLING
    BAKER, DJ
    HEATH, GR
    SCIENCE, 1983, 220 (4600) : 908 - 908
  • [6] DEEP-SEA DRILLING
    NATLAND, J
    GEOTIMES, 1981, 26 (02): : 21 - 22
  • [7] DEEP-SEA DRILLING
    不详
    GEOTIMES, 1982, 27 (02): : 25 - 26
  • [8] DEEP-SEA DRILLING BY JOIDES
    GERARD, R
    SCIENCE, 1969, 163 (3864) : 232 - &
  • [9] TRANSFORMING DEEP-SEA DRILLING
    Johnson, Jeff
    CHEMICAL & ENGINEERING NEWS, 2011, 89 (04) : 24 - 26
  • [10] Design and comparative analysis of self-propelling drill bit applied to deep-sea stratum drilling robot
    Zhang, Peihao
    Lin, Xingshuang
    Wang, Hao
    Chen, Jiawang
    Tian, Zhenwei
    Weng, Zixin
    Ren, Ziqiang
    Zhou, Peng
    JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A, 2023, 24 (10): : 925 - 936