Numerical and experimental study of a shell and tube heat exchanger for different baffles

被引:5
|
作者
Kaleru, Aparna [1 ]
Venkatesh, Sriram [1 ]
Kumar, Narasimha [2 ]
机构
[1] Univ Coll Engn, Osmania Univ, Dept Mech Engn, Hyderabad, India
[2] Chaitanya Bharathi Inst Technol, Dept Mech Engn, Hyderabad, India
关键词
baffle cuts; heat exchanger; helical baffles; nanofluids; performance evaluation criterion; PRESSURE-DROP; PERFORMANCE; SIDE; FLOW; LEAKAGE; ENHANCEMENT;
D O I
10.1002/htj.22780
中图分类号
O414.1 [热力学];
学科分类号
摘要
In the present work, the shell and tube heat exchanger (STHX) is designed based on The Tubular Exchanger Manufacturers Association standards with hot fluid (water) flowing on the shell side and cold fluid on the tube side. A comparison is made between the Nusselt number and friction factor obtained from numerical and experimental results of segmental baffles (SBs) and helical baffles (HB) with different baffle inclinations. The results show that SB provided a higher Colburn factor (j(s)) when compared with HBs STHXs (20 degrees, 30 degrees, 40 degrees, and 50 degrees), but shell side pressure drop is lower for 40 degrees HBs STHXs for the same shell side fluid flow rates.
引用
收藏
页码:2186 / 2206
页数:21
相关论文
共 50 条
  • [1] A comparative numerical study of shell and multi-tube heat exchanger performance with different baffles configurations
    Marzouk, S. A.
    Abou Al-Sood, M. M.
    El-Fakharany, Magda K.
    -Said, Emad M. S. El
    [J]. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2022, 179
  • [2] Numerical study on shell and tube heat exchangers with different baffles configurations
    Yousef, Ahmed
    Saim, Rachid
    Oztop, Hakan F. F.
    [J]. INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 2023, 33 (09) : 3255 - 3271
  • [3] Numerical investigation on a novel shell-and-tube heat exchanger with plate baffles and experimental validation
    Yang, Jie
    Liu, Wei
    [J]. ENERGY CONVERSION AND MANAGEMENT, 2015, 101 : 689 - 696
  • [4] Numerical Analysis of the Baffles Inclination on Fluid Behavior in a Shell and Tube Heat Exchanger
    Youcef, Ahmed
    Saim, Rachid
    [J]. JOURNAL OF APPLIED AND COMPUTATIONAL MECHANICS, 2021, 7 (01): : 312 - 320
  • [5] Numerical analysis and optimization study on shell-side performances of a shell and tube heat exchanger with staggered baffles
    Wang, Xinting
    Zheng, Nianben
    Liu, Zhichun
    Liu, Wei
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 124 : 247 - 259
  • [6] Experimental investigation of shell-and-tube heat exchanger with a new type of baffles
    Yingshuang Wang
    Zhichun Liu
    Suyi Huang
    Wei Liu
    Weiwei Li
    [J]. Heat and Mass Transfer, 2011, 47 : 833 - 839
  • [7] Experimental investigation of shell-and-tube heat exchanger with a new type of baffles
    Wang, Yingshuang
    Liu, Zhichun
    Huang, Suyi
    Liu, Wei
    Li, Weiwei
    [J]. HEAT AND MASS TRANSFER, 2011, 47 (07) : 833 - 839
  • [8] Numerical modeling and experimental validation of heat transfer and flow resistance on the shell side of a shell-and-tube heat exchanger with flower baffles
    You, Yonghua
    Fan, Aiwu
    Huang, Suyi
    Liu, Wei
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2012, 55 (25-26) : 7561 - 7569
  • [9] PIV experimental investigation on shell-side flow patterns of shell and tube heat exchanger with different helical baffles
    Wen, Jian
    Yang, Huizhu
    Wang, Simin
    Gu, Xin
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2017, 104 : 247 - 259
  • [10] Numerical study of the dynamic and thermal field of a flow in a shell and tube heat exchanger equipped with two baffles
    Youcef, Ahmed
    Saim, Rachid
    [J]. UPB Scientific Bulletin, Series D: Mechanical Engineering, 2019, 81 (01): : 133 - 142