Preparation of PANI-SA/CF anode to enhance the remediation and power generation capabilities of plant microbial fuel cells for chromium contaminated soil

被引:1
|
作者
Fan, Liping [1 ,2 ]
Feng, Wanxue [1 ,2 ]
机构
[1] Shenyang Univ Chem Technol, Key Lab Collaborat Control & Optimizat Technol Ind, Shenyang 110142, Peoples R China
[2] Shenyang Univ Chem Technol, Coll Environm & Safety Engn, Shenyang 110142, Peoples R China
关键词
Microbial fuel cell; Anode modification; Polyaniline; Sodium alginate; Soil remediation; SODIUM ALGINATE;
D O I
10.1007/s00449-024-02981-x
中图分类号
Q81 [生物工程学(生物技术)]; Q93 [微生物学];
学科分类号
071005 ; 0836 ; 090102 ; 100705 ;
摘要
Plant microbial fuel cells (PMFCs) has important value for soil remediation and power generation. To improve the performance of PMFCs, a PMFC experimental system was established based on potted scindapsus aureus. Polyaniline (PANI) and sodium alginate (SA) were used as modifiers to prepare PANI-SA modified carbon felt anode. The soil remediation ability and electricity generation ability of PMFCs with four different anodes were compared and analyzed. The experimental results show that the steady-state voltage, the removal rate of hexavalent chromium, and the total chromium removal rate of PMFC using PANI-SA modified anode were 5.25 mV, 98%, and 90%, respectively, which are 253%, 10.4%, and 10% higher than those of PMFCs using unmodified carbon felt anode. PMFC is effective and feasible for removing soil chromium pollution and achieving efficient soil remediation, while modifying anodes with PANI-SA can further improve the soil remediation and electricity generation capabilities of PMFC.
引用
收藏
页码:509 / 518
页数:10
相关论文
共 9 条
  • [1] Preparation of PANI-SA/CF anode to enhance the remediation and power generation capabilities of plant microbial fuel cells for chromium contaminated soil
    Liping Fan
    Wanxue Feng
    Bioprocess and Biosystems Engineering, 2024, 47 : 509 - 518
  • [2] Enhance Soil Remediation and Power Generation Capabilities of Plant Microbial Fuel Cells through PANI-CeO2 Modified Anode
    Fan, Liping
    Wang, Naijia
    POLISH JOURNAL OF ENVIRONMENTAL STUDIES, 2024, 33 (06): : 6135 - 6142
  • [3] Improvement of remediation ability of copper-contaminated soil by plant microbial fuel cell based on PANI-PDA anode modification
    Fan, Liping
    Zhao, Yidan
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2025, 20 (06):
  • [4] Wetland plant microbial fuel cells for remediation of hexavalent chromium contaminated soils and electricity production
    Guan, Chung-Yu
    Tseng, Yi-Ho
    Tsang, Daniel C. W.
    Hu, Anyi
    Yu, Chang-Ping
    JOURNAL OF HAZARDOUS MATERIALS, 2019, 365 : 137 - 145
  • [5] Plant microbial fuel cells with Oryza rufipogon and Typha orientalis for remediation of cadmium contaminated soil
    Tongphanpharn, Natagarn
    Chou, Chih-Huang
    Guan, Chung-Yu
    Yu, Chang-Ping
    ENVIRONMENTAL TECHNOLOGY & INNOVATION, 2021, 24
  • [6] Plant microbial fuel cells with Oryza rufipogon and Typha orientalis for remediation of cadmium contaminated soil
    Tongphanpharn, Natagarn
    Chou, Chih-Huang
    Guan, Chung-Yu
    Yu, Chang-Ping
    Guan, Chung-Yu (cyguan@niu.edu.tw); Yu, Chang-Ping (cpyu@ntu.edu.tw), 1600, Elsevier B.V. (24):
  • [7] Stratified chemical and microbial characteristics between anode and cathode after long-term operation of plant microbial fuel cells for remediation of metal contaminated soils
    Guan, Chung-Yu
    Hu, Anyi
    Yu, Chang-Ping
    SCIENCE OF THE TOTAL ENVIRONMENT, 2019, 670 : 585 - 594
  • [8] Enhanced performance of acridine degradation and power generation by microbial fuel cell with g-C3N4/PANI-DA/CF anode
    Jian M.
    Xue P.
    Zhang X.
    Xing Y.
    Ma L.
    Lv X.
    Shi K.
    Chemosphere, 2024, 362
  • [9] Optimization and simulation of a carbon-based flow-through composite anode configuration to enhance power generation and improve effluent quality simultaneously for microbial fuel cells
    Fu, Boya
    Xu, Ting
    Guo, Xingguo
    Liang, Peng
    Huang, Xia
    Zhang, Xiaoyuan
    JOURNAL OF CLEANER PRODUCTION, 2019, 229 : 542 - 551