Vorticity dynamics diagnosis of the internal flow field in a high-load counter-rotating compressor

被引:2
|
作者
Yan, T. [1 ]
Chen, H. [1 ]
Yan, P. [1 ]
机构
[1] Harbin Inst Technol, Sch Energy Sci & Engn, Harbin, Peoples R China
来源
AERONAUTICAL JOURNAL | 2023年 / 111卷 / 03期
关键词
counter-rotating compressor; numerical simulation; vorticity dynamics diagnosis; boundary enstrophy flux; aerodynamic optimisation design; PUMP-TURBINE; STALL; FLUX;
D O I
10.1017/aer.2023.40
中图分类号
V [航空、航天];
学科分类号
08 ; 0825 ;
摘要
A high-load counter-rotating compressor is optimised based on the method of coupling aerodynamic optimisation technology and computational fluid dynamics, and the flow structures in the passage are analysed and evaluated by vorticity dynamics diagnosis. The results show that the aerodynamic performance of optimised compressor are obviously improved at both design point and off-design point. By comparing the distribution characteristics of vorticity dynamics parameters on the blade surface before and after the optimisation, it is found that BVF (boundary vorticity flux) and circumferential vorticity can effectively capture high flow loss regions such as shock waves and secondary flow in the passage. In addition, the BEF (Boundary enstrophy flux) diagnosis method based on the theory of boundary enstrophy flux is developed, which expands the application scenario of the boundary vorticity dynamics diagnosis method. The change of vorticity dynamics parameters shows blade geometric parameters' influence on the passage's viscous flow field, which provides a theoretical basis for the aerodynamic optimisation design.
引用
收藏
页数:20
相关论文
共 50 条
  • [1] Aerodynamic optimization design of high-load counter-rotating compressor based on vorticity dynamic parameter distribution
    Yan, Tingsong
    Chen, Huanlong
    Yan, Peigang
    PHYSICS OF FLUIDS, 2025, 37 (01)
  • [2] Unsteady Investigation on Tip Flow Field and Rotating Stall in Counter-Rotating Axial Compressor
    Gao, Limin
    Li, Ruiyu
    Miao, Fang
    Cai, Yutong
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2015, 137 (07):
  • [3] AERODYNAMIC DESIGN AND ANALYSIS OF A TWO-STAGE HIGH-LOAD LOW-REACTION TRANSONIC ASPIRATED COUNTER-ROTATING COMPRESSOR
    Sun, Shijun
    Wang, Songtao
    Chen, Shaowen
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2017, VOL 2A, 2017,
  • [4] Research on 3D Design of High-Load Counter-Rotating Compressor Based on Aerodynamic Optimization and CFD Coupling Method
    Yan, Tingsong
    Chen, Huanlong
    Fang, Jiwei
    Yan, Peigang
    ENERGIES, 2022, 15 (13)
  • [5] On the flow field induced by two counter-rotating propellers at varying load conditions
    Capone, Alessandro
    Di Felice, Fabio
    Pereira, Francisco Alves
    OCEAN ENGINEERING, 2021, 221
  • [6] Effects of End Wall Boundary Layer Suction on Performance and Flow Field in a Counter-rotating Compressor
    Zhang, Peng
    Liu, Bo
    Yin, Yueqian
    JOURNAL OF AERONAUTICS ASTRONAUTICS AND AVIATION, 2021, 53 (04): : 521 - 533
  • [7] Investigation on the Influence of the Inlet Guide Vane on the Flow Rate and Efficiency Characteristic of a High-load Counter-rotating Fan at Low Corrected Speeds
    Yao, Ka
    Zhao, Wei
    Pei, Gang
    Zhao, Qing-Jun
    Xu, Jian-Zhong
    Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2022, 43 (01): : 74 - 81
  • [8] Impact of bow shock on tip leakage flow in counter-rotating compressor
    Xu Q.
    Liu Z.
    Xiang X.
    Zhou X.
    Zhao Q.
    Hangkong Dongli Xuebao/Journal of Aerospace Power, 2019, 34 (09): : 2027 - 2037
  • [9] Numerical investigation of the unsteady flow behaviors in a counter-rotating axial compressor
    Mao, Xiaochen
    Liu, Bo
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2016, 230 (03) : 289 - 301
  • [10] Further study on blade interactions in counter-rotating axial flow compressor
    Gao, Li-Min
    Miao, Fang
    Li, Rui-Yu
    Liu, Bo
    Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2015, 36 (01): : 46 - 49