Modification of Talc and Mechanical Properties of Polypropylene-Modified Talc Composite Drawn Fibers

A large amount of the polypropylene (PP) produced worldwide is used in the form of fibers. In this work, a new modification route for talc and PP is investigated, which is based on the in situ polymerization of a silane-siloxane monomer mixture on the surface of talc particles or PP pellets, respectively. The obtained modified talc and PP samples were used for the development of PP-talc composite drawn fibers. Tensile tests, thermogravimetry (TGA), and X-ray diffraction (XRD) were used for the characterization of the materials. It was observed that such a modification procedure resulted in the exfoliation of some talc particles. Enhanced tensile strength was observed for composite drawn fibers of a low talc content (1% with respect to PP) and a low modifier content (2% with respect to talc), while co-aggregation of talc and silicone may occur at high silicone and talc contents, resulting in the inferior mechanical performance of the corresponding composites. It was concluded that the produced silicone polymer simultaneously acts as a modifier, antioxidant, and compatibilizer. The proposed modification route is promising and should be further optimized.