Intramuscular EMG feature extraction and evaluation at different arm positions and hand postures based on a statistical criterion method

被引:1
|
作者
Asghar, Ali [1 ,2 ]
Khan, Saad Jawaid [1 ,7 ]
Azim, Fahad [2 ]
Shakeel, Choudhary Sobhan [1 ]
Hussain, Amatullah [3 ]
Niazi, Imran Khan [4 ,5 ,6 ]
机构
[1] Ziauddin Univ, Fac Engn Sci Technol & Management, Dept Biomed Engn, Karachi, Pakistan
[2] Ziauddin Univ, Fac Engn Sci Technol & Management, Dept Elect Engn, Karachi, Pakistan
[3] Ziauddin Univ, Coll Rehabil Sci, Karachi, Pakistan
[4] New Zealand Coll Chiropract, Ctr Chiropract Res, Auckland, New Zealand
[5] AUT Univ, Hlth & Rehabil Res Inst, Fac Hlth & Environm Sci, Auckland, New Zealand
[6] Aalborg Univ, Ctr Sensory Motor Interact, Dept Hlth Sci & Technol, Aalborg, Denmark
[7] Ziauddin Univ, Fac Engn Sci Technol & Management, Dept Biomed Engn, Block B, Karachi 74600, Pakistan
关键词
Statistical analysis [medical; feature extraction; intramuscular EMG; arm positions; hand postures; PATTERN-RECOGNITION; SELECTION;
D O I
10.1177/09544119221139593
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
Prostheses control using electromyography signals have shown promising aspects in various fields including rehabilitation sciences and assistive technology controlled devices. Pattern recognition and machine learning methods have been observed to play a significant role in evaluating features and classifying different limb motions for enhanced prosthetic executions. This paper proposes feature extraction and evaluation method using intramuscular electromyography (iEMG) signals at different arm positions and hand postures based on the RES Index value statistical criterion method. Sixteen-time domain features were selected for the study at two main circumstances; fixed arm position (FAP) and fixed hand posture (FHP). Eight healthy male participants (30.62 +/- 3.87 years) were asked to execute five motion classes including hand grip, hand open, rest, hand extension, and hand flexion at four different arm positions that comprise of 0 degrees, 45 degrees, 90 degrees, and 135 degrees. The classification process is accomplished via the application of the k-nearest neighbor (KNN) classifier. Then RES index was calculated to investigate the optimal features based on the proposed statistical criterion method. From the RES Index, we concluded that Variance (VAR) is the best feature while WAMP, Zero Crossing (ZC),and Slope Sign Change (SSC) are the worst ones in FAP conditions. On the contrary, we concluded that Average Amplitude Change (AAC) is the best feature while WAMP and Simple Square Integral (SSI) resulted in least RES Index values for FHP conditions. The proposed study has possible iEMG based applications such as assistive control devices, robotics. Also, working with the frequency domain features encapsulates the future scope of the study.
引用
收藏
页码:74 / 90
页数:17
相关论文
共 50 条
  • [1] Inter-classifier comparison for upper extremity EMG signal at different hand postures and arm positions using pattern recognition
    Asghar, Ali
    Khan, Saad Jawaid
    Azim, Fahad
    Shakeel, Choudhary Sobhan
    Hussain, Amatullah
    Niazi, Imran Khan
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 2022, 236 (02) : 228 - 238
  • [2] Feature and Channel Selection Using Correlation Based Method for Hand Posture Classification in Multiple Arm Positions
    Al-Angari, Haitham M.
    Kanitz, Gunter
    Tarantino, Sergio
    Rigosa, Jacopo
    Cipriani, Christian
    REPLACE, REPAIR, RESTORE, RELIEVE - BRIDGING CLINICAL AND ENGINEERING SOLUTIONS IN NEUROREHABILITATION, 2014, 7 : 227 - 236
  • [3] Feature Extraction and Pattern Recognition of EMG-based Signal for Hand Movements
    Jahan, Mosarrat
    Manas, Munish
    Sharma, Bharat Bhushan
    Gogoi, Babu Bikash
    2015 International Symposium on Advanced Computing and Communication (ISACC), 2015, : 49 - 52
  • [4] Research on the method of feature extraction based on ARM platform
    Zheng, Dezhi
    Wang, Kunming
    Cheng, Jialin
    Fan, Shangchun
    PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON ADVANCED DESIGN AND MANUFACTURING ENGINEERING, 2015, 39 : 1515 - 1521
  • [5] Surface EMG Based Hand Manipulation Identification Via Nonlinear Feature Extraction and Classification
    Ju, Zhaojie
    Ouyang, Gaoxiang
    Wilamowska-Korsak, Marzena
    Liu, Honghai
    IEEE SENSORS JOURNAL, 2013, 13 (09) : 3302 - 3311
  • [6] Feature Evaluation to Reduce False Triggering in Threshold Based EMG Prosthetic Hand
    Joshi, D.
    Kandpal, K.
    Anand, S.
    4TH KUALA LUMPUR INTERNATIONAL CONFERENCE ON BIOMEDICAL ENGINEERING 2008, VOLS 1 AND 2, 2008, 21 (1-2): : 769 - 772
  • [7] Classification of hand movements based on EMD-CCT feature extraction method through EMG using machine learning
    M. Karuna
    Sitaramanjaneya Reddy Guntur
    Multimedia Tools and Applications, 2025, 84 (10) : 7987 - 8013
  • [8] Wavelet Transform Based EMG Feature Extraction and Evaluation Using Scatter Graphs
    Lolure, Amol
    Thool, V. R.
    2015 INTERNATIONAL CONFERENCE ON INDUSTRIAL INSTRUMENTATION AND CONTROL (ICIC), 2015, : 1273 - 1277
  • [9] Automatic EMG feature evaluation for controlling a prosthetic hand using a supervised feature mining method: An intelligent approach
    Huang, HP
    Liu, YH
    Wong, CS
    2003 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS 1-3, PROCEEDINGS, 2003, : 220 - 225
  • [10] New feature extraction method based on fisher discriminant minimal criterion
    Zheng, Yujie
    Yang, Jingyu
    Xu, Yong
    Yu, Dongjun
    Jisuanji Yanjiu yu Fazhan/Computer Research and Development, 2006, 43 (07): : 1201 - 1206