Fatigue and Fracture Behavior of AlSi10Mg Manufactured by Selective Laser Melting: A Review

被引：10

作者：

Jiang, Z. ^{[1
]}

Sun, J. ^{[2
]}

Berto, F. ^{[3
,4
]}

Wang, X. ^{[1
]}

Qian, G. ^{[2
]}

机构：

[1] Beijing Jiaotong Univ, Sch Mech Elect & Control Engn, Beijing 100044, Peoples R China

[2] Chinese Acad Sci, Inst Mech, State Key Lab Nonlinear Mech, Beijing 100190, Peoples R China

[3] Norwegian Univ Sci & Technol, Dept Mech & Ind Engn, N-7491 Trondheim, Norway

[4] Sapienza Univ Rome, Dept Chem Engn Mat Environm, I-00184 Rome, Italy

来源：

PHYSICAL MESOMECHANICS | 2023年 / 26卷 / 04期

基金：

中国国家自然科学基金;

关键词：

selective laser melting; AlSi10Mg; crack initiation; post-treatment; fatigue life prediction; HIGH-CYCLE FATIGUE; POWDER BED FUSION; SURFACE-ROUGHNESS; RESIDUAL-STRESSES; MELTED ALSI10MG; CRACK INITIATION; LIFE PREDICTION; PROCESS PARAMETERS; BUILD ORIENTATION; ALLOY INFLUENCE;

D O I：

10.1134/S102995992304001X

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

Selective laser melting (SLM) is one of the most promising metal additive manufacturing technologies. SLMed Al-Si alloys have been widely used in the rail transport, aerospace, and automotive industries. Recently, the fatigue and fracture properties of SLMed Al-Si alloys have attracted considerable attention due to their application in critical load-bearing structures. This review aims to better understand the recent progress on the fatigue and fracture investigations of SLMed Al-Si alloys, especially AlSi10Mg, with emphasis on the effect of defects, heterogeneous microstructure, residual stress, and post-treatment methods. In addition, fatigue and fracture modeling methods are discussed. Finally, the challenges and future research opportunities are prospected.

引用

页码：367 / 390

页数：24

共 50 条

[1] Fatigue and Fracture Behavior of AlSi10Mg Manufactured by Selective Laser Melting: A Review
Z. Jiang
J. Sun
F. Berto
X. Wang
G. Qian
Physical Mesomechanics, 2023, 26 : 367 - 390
[2] Effect of constraint on the fracture property of AlSi10Mg manufactured by selective laser melting
Jiang, Zhonghua
Wang, Xi
Qian, Guian
Sun, Jingyu
ENGINEERING FRACTURE MECHANICS, 2022, 275
[3] Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior
Brandl, Erhard
Heckenberger, Ulrike
Holzinger, Vitus
Buchbinder, Damien
MATERIALS & DESIGN, 2012, 34 : 159 - 169
[4] A review on the simulation of selective laser melting AlSi10Mg
Wang, Xingyao
Lu, Qinghua
Zhang, Peilei
Yan, Hua
Shi, Haichuan
Sun, Tianzhu
Zhou, Kai
Chen, Kaiyuan
OPTICS AND LASER TECHNOLOGY, 2024, 174
[5] Fatigue Strength of an AlSi10Mg Alloy Fabricated by Selective Laser Melting
M. V. Gerov
E. Yu. Vladislavskaya
V. F. Terent’ev
D. V. Prosvirnin
O. S. Antonova
A. G. Kolmakov
Russian Metallurgy (Metally), 2019, 2019 : 392 - 397
[6] Study on the Selective Laser Melting of AlSi10Mg
Zhang Wenqi
Zhu Haihong
Hu Zhiheng
Zeng Xiaoyan
ACTA METALLURGICA SINICA, 2017, 53 (08) : 918 - 926
[7] Fatigue Strength of an AlSi10Mg Alloy Fabricated by Selective Laser Melting
Gerov, M. V.
Vladislavskaya, E. Yu.
Terent'ev, V. F.
Prosvirnin, D. V.
Antonova, O. S.
Kolmakov, A. G.
RUSSIAN METALLURGY, 2019, 2019 (04): : 392 - 397
[8] Effects of Hole Cold Expansion on Fatigue Behaviors of AlSi10Mg Plate Manufactured by Selective Laser Melting
Gao, Peng
Zhang, Bin
Wang, Min
Zan, Tao
Gao, Xiangsheng
Zhao, Pengjing
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 33 (20) : 11250 - 11264
[9] Microstructural evolution and characterization of AlSi10Mg alloy manufactured by selective laser melting
Dong, Zhichao
Xu, Mengchen
Guo, Haowei
Fei, Xiangyu
Liu, Yabo
Gong, Benkui
Ju, Guannan
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 17 : 2343 - 2354
[10] Mechanical behavior, damage mode and mechanism of AlSi10Mg porous structure manufactured by selective laser melting
Cai, Xuanming
Pan, Chenglong
Wang, Junyuan
Zhang, Wei
Fan, Zhiqiang
Gao, Yubo
Xu, Peng
Sun, Heyang
Li, Jun
Yang, Wenshu
JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 897

← 1 2 3 4 5 →