A Study on the Dynamic Evolution Mechanism of the Steady Magnetic Field on the Internal Flow Behavior of a Laser Melting Pool

被引:2
|
作者
Xie, Songjing [1 ]
Jiang, Ke [2 ,3 ]
Wang, Liang [2 ,3 ]
Yao, Jianhua [2 ,3 ]
机构
[1] Zhejiang Tech Inst Econ, Automobile Technol Sch, Hangzhou 310018, Peoples R China
[2] Zhejiang Univ Technol, Inst Laser Adv Mfg, Hangzhou 310014, Peoples R China
[3] Zhejiang Prov Collaborat Innovat Ctr High End Lase, Hangzhou 310014, Peoples R China
关键词
laser melting; molten pool flow behavior; numerical simulation; steady magnetic field; INCONEL; 718;
D O I
10.3390/met13040720
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A 2D model of laser melting consisting of heat transfer, hydrodynamic flow, surface tension, and a free surface motion was established. A physical field simulation of the laser melting process was performed, and the effect of steady magnetic field parameters on the internal flow and temperature fields of the melt pool was analyzed and validated by experiments. The results show that the steady magnetic field can suppress the melt pool flow rate, but slightly influences its temperature field, and with an increase in the magnetic field strength, the ripples on the melting surface decrease with increasing magnetic flux density. Compared with the molten pool depth experiment results, the simulation molten pool depth was 792 mu m, representing a difference in value of 13.5%. The surface ripples of the molten pool fluctuated greatly in the absence of a magnetic field, while the surface ripples were suppressed when the magnetic flux density was 2T. This is consistent with the simulation results, thus effectively demonstrating the simulation model's accuracy.
引用
收藏
页数:18
相关论文
共 50 条
  • [1] Influence of steady magnetic field on dynamic behavior mechanism in full penetration laser beam welding
    Rong, Youmin
    Xu, Jiajun
    Cao, Haiyin
    Zheng, Haojie
    Huang, Yu
    Zhang, Guojun
    JOURNAL OF MANUFACTURING PROCESSES, 2017, 26 : 399 - 406
  • [2] Study on the visualization of laser cladding molten pool flow field based on attention mechanism
    Liang, Zhimin
    Ren, Zheng
    Rao, Yuzhong
    Wang, Kehong
    Wang, Liwei
    Wang, Xiaopeng
    JOURNAL OF MANUFACTURING PROCESSES, 2025, 134 : 337 - 347
  • [3] Influence of a Rotating Magnetic Field on Laser Melting Titanium Alloy Melt Pool
    Yang Guang
    Xue Xiong
    Qin Lanyun
    Wang Wei
    RARE METAL MATERIALS AND ENGINEERING, 2016, 45 (07) : 1804 - 1810
  • [4] Suppression effect of a steady magnetic field on molten pool during laser remelting
    Wang, Liang
    Yao, Panhua
    Hu, Yong
    Song, Shiying
    APPLIED SURFACE SCIENCE, 2015, 351 : 794 - 802
  • [5] Mechanism investigation of the influence of the magnetic field on the molten pool behavior during laser welding of aluminum alloy
    Cao, Longchao
    Zhou, Qi
    Liu, Huaping
    Li, Jingchang
    Wang, Shengyi
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2020, 162
  • [6] Dynamic evolution of temperature field, flow field, and solidification behavior during multilayer multitrack laser cladding
    Li, Gaosong
    Wei, Xuefeng
    Zhang, Suai
    Liu, Yongjun
    Wang, Zhenya
    SURFACE & COATINGS TECHNOLOGY, 2024, 487
  • [7] Study on the dynamic behavior of molten pool in laser welding process
    Hanjie Xuebao/Transactions of the China Welding Institution, 2023, 44 (11): : 1 - 7
  • [8] Dynamic behavior of molten pool flow field for active laser welded-thick stainless steel plates
    Mei, L-F
    Xie, S.
    Yan, D-B
    Lei, Z-Q
    Yin, W.
    Qin, J-H
    MATERIALS RESEARCH EXPRESS, 2021, 8 (07)
  • [9] Fluid Flow Simulation of the Influence of a Steady Magnetic Field on the Weld Pool Dynamics in Deep Penetration Laser Beam Welding of Aluminum
    BACHMANN Marcel
    AVILOV Vjaceslav
    GUMENYUK Andrey
    RETHMEIER Michael
    Journal of Iron and Steel Research(International), 2012, (S1) : 467 - 470
  • [10] Molten pool behavior and solidification characterization in steady magnetic field assisted laser-MIG hybrid welding of aluminum alloy
    Zhan, Xiaohong
    Liu, Xing
    Li, Yue
    Zhao, Yanqiu
    Wang, Jianfeng
    JOURNAL OF MANUFACTURING PROCESSES, 2022, 84 : 622 - 638