Effect of pre-aging on microstructure, activation energy, texture evolution of Mg-9Gd-4Y-2Zn-0.5Zr alloy during compression deformation

被引:4
|
作者
Jia, Leichen [1 ]
Zheng, Jie [1 ]
Yan, Zhaoming [1 ]
Liu, Liang [1 ]
Dai, Xueyan [1 ]
Zhang, Zhimin [1 ]
Xue, Yong [1 ]
机构
[1] North Univ China, Sch Mat Sci & Engn, Taiyuan 030051, Peoples R China
基金
中国国家自然科学基金;
关键词
Pre-aged; Dynamic recrystallization behavior; Texture; Mg-Gd-Y-Zn-Zr alloy; HOT DEFORMATION; DYNAMIC RECRYSTALLIZATION; MECHANICAL-PROPERTIES; TENSILE PROPERTIES; MG ALLOY; BEHAVIOR; MAGNESIUM;
D O I
10.1016/j.jmrt.2023.08.201
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper illustrated the effects of pre-aging on the microstructure, texture evolution, and deformation behavior of Mg-9Gd-4Y-2Zn-0.5Zr alloy during hot compression. Dynamic recrystallization (DRX) behavior, texture evolution, stress-strain curve, and activation energy of the solid solution and pre-aged alloy were evaluated. The results showed that the second-phase particles of the pre-aged samples exhibit combination of two types particles structure, which is composed of coarse dynamic precipitation particles and fine nanoparticles. The combination of these two types particles showed the best grain refinement effect by accelerating the DRX process, as the coarse dynamic precipitation particles promoted DRX through the PSN mechanism and the fine granular phase pinned dislocations and inhibited grain growth. As a result, the pre-aged samples had a higher DRX grain volume fractions and smaller average grain sizes than the solid solution alloys. In addition, the pre-aged sample had higher deformation activation energy (Q= 294.8 kJ/mol) than solid solution sample (Q= 223 kJ/ mol) because b-phase pin dislocations formed during deformation restrained the movement of grain boundaries. The pre-aged alloys also showed a more concentrated texture than the solid solution alloys, with the c-axis of the coarse grains distributed from the compression direction (CD) at 30 degrees inclination to the normal direction (ND). The c-axis distribution of the coarse grains was more scattered in the solid solution alloys. A hot processing map was constructed for the pre-aged alloy and used for evaluation. The optimal deformation parameters for the pre-aged Mg-9Gd-4Y-2Zn-0.5Zr alloy were between 0.001 and 0.1 s-1 at 400 degrees C-480 degrees C. These significant observations not only provide theoretical guidance but also practical application for setting plastic forming deformation parameters in industrial production.(c) 2023 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
引用
收藏
页码:4755 / 4769
页数:15
相关论文
共 50 条
  • [1] Hot Deformation Behaviour and Constitutive Equation of Mg-9Gd-4Y-2Zn-0.5Zr Alloy
    Nie, Yangjunfeng
    Zheng, Jie
    Han, Rui
    Jia, Leichen
    Zhang, Zhimin
    Xue, Yong
    MATERIALS, 2022, 15 (05)
  • [2] Effect of deep cryogenic treatment on the microstructure and tensile property of Mg-9Gd-4Y-2Zn-0.5Zr alloy
    Jia, Jingjing
    Meng, Mu
    Zhang, Zhimin
    Yang, Xue
    Lei, Genxing
    Zhang, Honglei
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 16 : 74 - 87
  • [3] Microstructure and Texture Evolution of Mg-Gd-Y-Zn-Zr Alloy by Compression-Torsion Deformation
    Xu, Ping
    Yu, Jianmin
    Zhang, Zhimin
    MATERIALS, 2019, 12 (17)
  • [4] EFFECT OF UPSETTING-EXTRUSION-UPSETTING ON THE RECRYSTALLIZATION OF AN Mg-9Gd-4Y-2Zn-0.5Zr ALLOY
    Peng, Zhikang
    Jia, Leichen
    Zhang, Guanshi
    Zhang, Zhimin
    Wang, Qiang
    Yu, Jianmin
    Xu, Jian
    Xue, Yong
    MATERIALI IN TEHNOLOGIJE, 2022, 56 (04): : 351 - 358
  • [5] EFFECT OF COOLING RATE ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF SOLUTION-TREATED Mg-9Gd-4Y-2Zn-0.5Zr ALLOY
    Wang, Zixuan
    Jia, Leichen
    Zheng, Jie
    Zhang, Zhimin
    Yu, Jianmin
    Zhao, Xi
    Xue, Yong
    MATERIALI IN TEHNOLOGIJE, 2022, 56 (02): : 201 - 208
  • [6] Phase Transformation and Recrystallization of As-Cast and Homogenized Mg-9Gd-4Y-2Zn-0.5Zr Alloys during Hot Compression
    Jinsheng Ji
    Zhaoming Yan
    Jie Zheng
    Jishi Zhang
    Qiang Wang
    Zhimin Zhang
    Yong Xue
    Journal of Materials Engineering and Performance, 2023, 32 : 11014 - 11023
  • [7] Phase Transformation and Recrystallization of As-Cast and Homogenized Mg-9Gd-4Y-2Zn-0.5Zr Alloys during Hot Compression
    Ji, Jinsheng
    Yan, Zhaoming
    Zheng, Jie
    Zhang, Jishi
    Wang, Qiang
    Zhang, Zhimin
    Xue, Yong
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (24) : 11014 - 11023
  • [8] On the microstructure and RE-texture evolution during hot tensile deformation of Mg-Gd-Y-Zn-Zr alloy
    Shokri, Mozhgan
    Zarei-Hanzaki, Abbas
    Abedi, Hamid Reza
    Cho, Jae Hyung
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 15 : 6974 - 6989
  • [9] The abnormal flow behavior of Mg-9Gd-4Y-2Zn-0.5Zr alloy during hot tensile deformation at high temperature and low strain rate
    Meng, Mu
    Wang, Xiaoying
    Zhang, Jinbiao
    Chen, Xingxing
    Lei, Genxing
    Yan, Zhaoming
    Zhang, Zhimin
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2025, 34 : 259 - 272
  • [10] Effect of Deformation Parameters on Recrystallization Behavior and Long-Period Stacking-Ordered Phase of Mg-9Gd-4Y-2Zn-0.5Zr Alloy
    Han, Rui
    Zheng, Jie
    Yan, Zhaoming
    Jia, Leichen
    Jia, Jingjing
    Liu, Liang
    Zhang, Zhimin
    Xue, Yong
    MATERIALS, 2022, 15 (05)