OPTIMIZATION OF THE STEEL FLOW IN THE TWO-STRAND TUNDISH USING DIFFERENT GEOMETRY OF IMPACT PAD

被引：0
|
作者：
Cupek, J. [1 ]
Walek, J. [1 ]
Tkadleckova, M. [1 ]
Pieprzyca, J. [2 ]
Merder, T. [2 ]
Saternus, M. [2 ]
机构：
[1] Tech Univ Ostrava VSB, Ostrava, Czech Republic
[2] Silesian Tech Univ, Fac Mat Sci, Katowice, Poland
来源：
METALURGIJA | 2023年 / 62卷 / 02期
关键词：
tundish; liquid steel flow; arrangement of working space; physical water model;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
One of the primary factors affecting the quality of continuously cast billets is the way the steel flows and mixes in the tundish of Continuous Steel Casting (CSC) machine. This is of particular importance in the case of continuous billets. The article presents the results of model tests of identifying the mechanism of liquid steel flow through a tundish under the influence of the applied arrangement of the working space. Two models of turbulence inhibitors and an impact pad with the surface of a sphere segment were used for the research. The tests were carried out with the use of the physical water model of the CSC device, and the obtained results were verified by numerical methods.
引用
收藏
页码：179 / 182
页数：4
相关论文
共 50 条
  • [1] Numerical and Physical Modeling of Steel Flow in a Two-Strand Tundish for Different Casting Conditions
    Braun, Alexander
    Warzecha, Marek
    Pfeifer, Herbert
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2010, 41 (03): : 549 - 559
  • [2] Numerical and Physical Modeling of Steel Flow in a Two-Strand Tundish for Different Casting Conditions
    Alexander Braun
    Marek Warzecha
    Herbert Pfeifer
    Metallurgical and Materials Transactions B, 2010, 41 : 549 - 559
  • [3] Flow behavior and heat transfer of molten steel in a two-strand tundish heated by plasma
    Zhao, Mengjing
    Wang, Yong
    Yang, Shufeng
    Li, Jingshe
    Liu, Wei
    Song, Zhaoqi
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 13 : 561 - 572
  • [4] Flow behavior and heat transfer of molten steel in a two-strand tundish heated by plasma
    Yang, Shufeng (yangshufeng@ustb.edu.cn); Li, Jingshe (lijingshe@ustb.edu.cn), 1600, Elsevier Editora Ltda (13):
  • [5] Flow Characteristics for Two-Strand Tundish in Continuous Slab Casting Using PIV
    Huang, Jun
    Yuan, Zhigang
    Shi, Shaoyuan
    Wang, Baofeng
    Liu, Chi
    METALS, 2019, 9 (02)
  • [6] Effect of different removal conditions on the growth and removal of inclusions in the molten steel in a two-strand tundish
    Ling, Haitao
    Zhang, Lifeng
    Wang, Haijun
    METALLURGICAL RESEARCH & TECHNOLOGY, 2017, 114 (05)
  • [7] Modeling of Liquid Steel/Slag/Argon Gas Multiphase Flow During Tundish Open Eye Formation in a Two-Strand Tundish
    Saikat Chatterjee
    Donghui Li
    Kinnor Chattopadhyay
    Metallurgical and Materials Transactions B, 2018, 49 : 756 - 766
  • [8] Effect of Gas Injection Condition on Fluid Flow in a Two-strand Tundish
    Zhu, Jingtao
    Li, Jingshe
    Sun, Liyuan
    Li, Jiao
    MATERIALS PROCESSING TECHNOLOGY, PTS 1-4, 2011, 291-294 : 255 - +
  • [9] Numerical simulation on the multiphase flow and reoxidation of the molten steel in a two-strand tundish during ladle change
    Wang, Jingcheng
    Liu, Zhentong
    Chen, Wei
    Chen, Hongliang
    Zhang, Lifeng
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2024, 31 (07) : 1540 - 1553
  • [10] Numerical Simulation of the Growth and Removal of Inclusions in the Molten Steel of a Two-Strand Tundish
    Haitao Ling
    Lifeng Zhang
    JOM, 2013, 65 : 1155 - 1163
12345