Heat Treatment, Microstructure and Corrosion Relationship on 316L SS Produced by AM

被引：7
|
作者：
Ozer, Gokhan [1 ]
机构：
[1] Fatih Sultan Mehmet Vakif Univ, Aluminium Test Training & Res Ctr ALUTEAM, Halic Campus, TR-34445 Istanbul, Turkey
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2023年 / 39卷 / 06期
关键词：
Additive manufacturing (AM); 316L SS; direct metal laser sintering (DMLS); electrochemical corrosion; mechanical properties; AUSTENITIC STAINLESS-STEEL; RESISTANCE; PERFORMANCE; BEHAVIOR;
D O I：
10.1080/02670836.2022.2131242
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, 316L stainless steel (SS) samples produced with standard parameters using the Additive Manufacturing method were heat treated with different parameters, and the effects of heat treatment on the microstructure, phase changes, hardness, porosity, and corrosion of the material were examined in detail. The results showed that the as-built microstructure of 316L stainless steel material produced by Additive Manufacturing deteriorated as the heat treatment temperature increased and the hardness decreased. The corrosion resistance of the material increased. The best corrosion resistance was obtained from heat treatment at 1150 degrees C for 2 h.
引用
收藏
页码：671 / 682
页数：12
相关论文
共 50 条
  • [1] Microstructure and corrosion resistance of TLPB of Inconel 625 to 316l SS
    Ajabshiri, Mehrdad
    Ashrafi, Ali
    Shamanian, Morteza
    Karimi, Mohammad Ali
    MATERIALS SCIENCE AND TECHNOLOGY, 2022, 38 (07) : 444 - 452
  • [2] The influence of heat treatment on the microstructural, mechanical and corrosion behaviour of cold sprayed SS 316L coatings
    G. Sundararajan
    P. Sudharshan Phani
    A. Jyothirmayi
    Ravi C. Gundakaram
    Journal of Materials Science, 2009, 44 : 2320 - 2326
  • [3] The influence of heat treatment on the microstructural, mechanical and corrosion behaviour of cold sprayed SS 316L coatings
    Sundararajan, G.
    Phani, P. Sudharshan
    Jyothirmayi, A.
    Gundakaram, Ravi C.
    JOURNAL OF MATERIALS SCIENCE, 2009, 44 (09) : 2320 - 2326
  • [4] Study of Heat Treatment Effect on Microstructure of PTA Weld Deposited Surface of SS 316L Steel
    Naik, H., V
    Deshmukh, D. D.
    Kalyankar, V. D.
    ADVANCES IN ADDITIVE MANUFACTURING AND JOINING, AIMTDR 2018, 2020, : 597 - 607
  • [5] Microstructure and corrosion properties of nitrogen stainless steel 316L produced by hipping
    Abdel-Karim, R
    Elmahallawi, I
    El-Menshawy, K
    POWDER METALLURGY, 2004, 47 (01) : 43 - 48
  • [6] Influence of the heat treatment on the surface bioactivity of investment cast SS 316L
    Morsiya, Chintan
    Sutaria, Mayur
    Patel, Sandip
    MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 2878 - 2884
  • [7] Corrosion resistance of magnetoelectropolished AISI 316L SS biomaterial
    Hryniewicz, Tadeusz
    Rokosz, Krzysztof
    ANTI-CORROSION METHODS AND MATERIALS, 2014, 61 (02) : 57 - 64
  • [8] Effects of heat treatment through muffle furnace or microwave on microstructure and corrosion behavior of 316L stainless steel produced by selective laser melting
    Hsu, Hsueh-Chuan
    Wong, Ka-Kin
    Wu, Shih-Ching
    Hou, Po-Jen
    Ho, Wen-Fu
    MRS COMMUNICATIONS, 2023, 13 (01) : 177 - 183
  • [9] Passivation of 316L SS
    不详
    MATERIALS PERFORMANCE, 2003, 42 (08) : 64 - 66
  • [10] Mo in 316L SS
    不详
    MATERIALS PERFORMANCE, 2001, 40 (12) : 10 - 11
12345