A dynamic stiffness model for high-speed ball screw pair with the mass center of screw nut considered

被引:2
|
作者
Jin, Lan [1 ]
Li, Chunhui [1 ]
Wang, Xiao [2 ]
Xie, Liming [1 ]
机构
[1] Lanzhou Univ Technol, Sch Mech & Elect Engn, Lanzhou 730050, Gansu, Peoples R China
[2] Lanzhou Ls Heat Exchange Equipment Co Ltd, Lanzhou 730050, Gansu, Peoples R China
关键词
Ball screw; center of mass; Timoshenko beam theory; concentrated mass parameter method; dynamic stiffness; FEED SYSTEM;
D O I
10.1051/meca/2023018
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The development of accurate dynamic stiffness models is a key aspect in the design process of ball screws. However, variations in the nut center of mass position can affect the dynamic stiffness, which makes it difficult to develop a stiffness model. To address this issue, this paper considers the variation of the nut center of mass position and the approach between the ball screw beam unit stiffness matrix and the nut interface element stiffness matrix. Then, based on Timoshenko beam theory and a concentrated mass parameter method, a dynamic stiffness model for a high-speed ball screw pair considering the variation of the nut center of mass position is developed. Finally, the feasibility of the dynamic stiffness matrix of the high-speed ball screw pairs is verified through the inherent frequencies obtained from experiments and simulations of the ball screw pair in the free state and compared with the classical finite element method to verify the importance of this method and to provide a theoretical basis for its dynamic design and structural optimisation.
引用
收藏
页数:7
相关论文
共 50 条
  • [1] Modal analysis of the ball screw nut pair of high speed vertical machining center
    Wang, Yong-Ming
    Gui, Xiang
    Ye, Jun
    DESIGN, MANUFACTURING AND MECHATRONICS (ICDMM 2015), 2016, : 117 - 123
  • [2] Study of the dynamic characteristic of high-speed ball screw
    Mu, Shi-Gang
    Feng, Xian-Ying
    Hunan Daxue Xuebao/Journal of Hunan University Natural Sciences, 2011, 38 (12): : 25 - 29
  • [3] Reliability and sensitivity of static stiffness of single nut ball screw pair
    Zhang Y.
    Shi Y.
    Li C.
    Deng Q.
    Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2016, 48 (07): : 140 - 144
  • [4] STIFFNESS OF A BALL SCREW WITH CONSIDERATION OF DEFORMATION OF THE SCREW, NUT AND SCREW THREAD - (PRELOADED DOUBLE NUT)
    TAKAFUJI, K
    NAKASHIMA, K
    JSME INTERNATIONAL JOURNAL SERIES III-VIBRATION CONTROL ENGINEERING ENGINEERING FOR INDUSTRY, 1990, 33 (04): : 620 - 626
  • [5] Dynamic modeling and analysis of the high-speed ball screw feed system
    Zhang, Huijie
    Zhang, Jun
    Liu, Hui
    Liang, Tao
    Zhao, Wanhua
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2015, 229 (05) : 870 - 877
  • [6] Modeling of Ball Screw-Nut Interface Stiffness With Wear (Ball Screw Wear Dynamics)
    Heydarnia, Hoda
    Altintas, Yusuf
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2025, 147 (02):
  • [7] Analysis on Dynamic Contact Characteristics and Dynamic Stiffness Estimating Method of Single Nut Ball Screw Pair Based on the Whole Rolling Elements Model
    Chen, Ye
    Zhao, Chunyu
    Li, Zhenjun
    Lu, Zechen
    APPLIED SCIENCES-BASEL, 2020, 10 (17):
  • [8] Improved Screw-Nut Interface Model for High-Performance Ball Screw Drives
    Okwudire, Chinedum E.
    JOURNAL OF MECHANICAL DESIGN, 2011, 133 (04)
  • [9] COMPARISON OF THE STIFFNESS OF BALL AND ROLLER TRANSMISSIONS OF THE SCREW AND NUT TYPE
    KOZYREV, VV
    SOVIET ENGINEERING RESEARCH, 1987, 7 (05): : 34 - 37
  • [10] Analysis on High-speed Dynamic Properties of Micro Steep-lead Ball Screw
    Zhang, Han
    Zhu, Chenglin
    Zhao, Guoping
    4TH INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING FOR ADVANCED TECHNOLOGIES (ICMEAT 2015), 2015, : 232 - 236