Integration of hydrothermal liquefaction of Cyanophyta and supercritical water oxidation of its aqueous phase products: Biocrude production and nutrient removal

Cyanophyta has the potential to produce biocrude via hydrothermal liquefaction (HTL). However, aqueous phase products (APs), as by-products of HTL, pose a risk of eutrophication for the high levels of carbon, nitrogen, and phosphorus. Supercritical water oxidation (SCWO) can efficiently convert organics into small molecules, offering a technique for the harmless treatment of APs. Effects of holding time, pressure, and moisture content on the biocrude yields from isothermal HTL (300 degrees C) and fast HTL (salt bath temperature of 500 degrees C) were comprehensively investigated. Biocrude properties were characterized by elemental analysis, FT-IR and GC-MS. Subsequently, the APs obtained under the conditions producing the highest biocrude yield were subjected to SCWO at 550 degrees C with different oxidation coefficients (n) from 0 to 2. Removal rates of chemical oxygen demand (COD), ammonia nitrogen (NH3-N), and total phosphorus (TP) were further explored. The results show that the highest biocrude yields from isothermal HTL and fast HTL were 24.2 wt% (300 degrees C, 1800 s, 25 MPa, and 80 wt% moisture content) and 21.9 wt% (500 degrees C, 40 s, 25 MPa, and 80 wt% moisture content), respectively. The biocrude primarily consisted of N -containing heterocyclic compounds, amides, and acids. SCWO effectively degraded the COD and TP in APs, while the NH3-N required further degradation. At n = 2, the highest removal rates of COD, NH3-N and TP were 98.5 %, 22.6 % and 89.1 %, respectively.