Rapid Prototyping Technologies: 3D Printing Applied in Medicine

被引：7
|
作者：
Oleksy, Malgorzata [1 ]
Dynarowicz, Klaudia [2 ]
Aebisher, David [3 ]
机构：
[1] Univ Rzeszow, Med Coll, Students English Div Sci Club, PL-35959 Rzeszow, Poland
[2] Univ Rzeszow, Med Coll, Ctr Innovat Res Med & Nat Sci, PL-35310 Rzeszow, Poland
[3] Univ Rzeszow, Med Coll, Dept Photomed & Phys Chem, PL-35959 Rzeszow, Poland
来源：
PHARMACEUTICS | 2023年 / 15卷 / 08期
关键词：
3D printing; applications of biomaterials in medicine; polymer biomaterials; CALCIUM-PHOSPHATE; TISSUE; SCAFFOLDS; DELIVERY; DESIGN; BIOIMPLANTS; PERFORMANCE; STRATEGIES; HYDROGELS; SURGERY;
D O I：
10.3390/pharmaceutics15082169
中图分类号：
R9 [药学];
学科分类号：
1007 ;
摘要：
Three-dimensional printing technology has been used for more than three decades in many industries, including the automotive and aerospace industries. So far, the use of this technology in medicine has been limited only to 3D printing of anatomical models for educational and training purposes, which is due to the insufficient functional properties of the materials used in the process. Only recent advances in the development of innovative materials have resulted in the flourishing of the use of 3D printing in medicine and pharmacy. Currently, additive manufacturing technology is widely used in clinical fields. Rapid development can be observed in the design of implants and prostheses, the creation of biomedical models tailored to the needs of the patient and the bioprinting of tissues and living scaffolds for regenerative medicine. The purpose of this review is to characterize the most popular 3D printing techniques.
引用
收藏
页数：20
相关论文
共 50 条
  • [1] Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing
    Cie, Christina
    [J]. JOURNAL OF PRINT AND MEDIA TECHNOLOGY RESEARCH, 2015, 4 (01): : 70 - 70
  • [2] 3D Printing for the Rapid Prototyping of Structural Electronics
    Macdonald, Eric
    Salas, Rudy
    Espalin, David
    Perez, Mireya
    Aguilera, Efrain
    Muse, Dan
    Wicker, Ryan B.
    [J]. IEEE ACCESS, 2014, 2 : 234 - 242
  • [3] 3D rapid prototyping technologies in the power industry
    Rak, Mateusz
    Najgebauer, Mariusz
    Jedryka, Jaroslaw
    [J]. PRZEGLAD ELEKTROTECHNICZNY, 2023, 99 (11): : 236 - 240
  • [4] 3D Printing for Rapid Prototyping of Ionization Chamber Arrays
    Brivio, D.
    Albert, S.
    Naumann, L.
    Sajo, E.
    Zygmanski, P.
    [J]. MEDICAL PHYSICS, 2019, 46 (06) : E411 - E411
  • [5] Rapid prototyping using 3D printing in bioanalytical research
    Zhang, Chengsen
    Bills, Brandon J.
    Manicke, Nicholas E.
    [J]. BIOANALYSIS, 2017, 9 (04) : 329 - 331
  • [6] 3D printing technologies applied to orthoses production
    Moya Ferrari, Ana Lya
    Piculo dos Santos, Aline Darc
    Medola, Fausto Orsi
    [J]. REVISTA TECNOLOGIA E SOCIEDADE, 2019, 15 (38): : 215 - 228
  • [7] Polymer ionomers for rapid prototyping and rapid manufacturing by means of 3D printing
    Pfister, A
    Walz, U
    Laib, A
    Mülhaupt, R
    [J]. MACROMOLECULAR MATERIALS AND ENGINEERING, 2005, 290 (02) : 99 - 113
  • [8] Characterization of 3d printing filaments applied in restoration of sensitive archaeological objects using rapid prototyping
    Aura-Castro, Elvira
    Diaz-Marin, Carmen
    Mas-Barbera, Xavier
    Sanchez, Miguel
    Vendrell Vidal, Eduardo
    [J]. RAPID PROTOTYPING JOURNAL, 2021, 27 (04) : 645 - 657
  • [9] 3D printing technique applied to rapid casting
    Bassoli, Elena
    Gatto, Andrea
    Iuliano, Luca
    Violante, Maria Grazia
    [J]. RAPID PROTOTYPING JOURNAL, 2007, 13 (03) : 148 - 155
  • [10] Application of 3D colour printing for the rapid prototyping of functional models
    Junk, S.
    Saemann-Sun, J.
    [J]. INNOVATIVE DEVELOPMENTS IN DESIGN AND MANUFACTURING: ADVANCED RESEARCH IN VIRTUAL AND RAPID PROTOTYPING, 2010, : 677 - +
12345