Free radical graft polymerization of hydroxyethyl methacrylate and acrylic acid on polyetherimide membrane surface via redox system to improve anti-fouling and oil resistance performance

In this paper, a new scheme of graft polymerization of acrylic acid (AA) and hydroxyethyl methacrylate (HEMA) initiated by the generation of free radicals in a redox system was used to modify the surface of polyetherimide (PEI) membranes and to improve the antifouling and oil resistance properties. Various physicochemical characterization techniques (ATR-FTIR, XPS, TG, SEM, AFM, etc.) confirmed the successful grafting of hydrophilic monomers onto the PEI membrane surface. Further, the effects of different monomer concentrations on graft density, permeation separation, contamination resistance, and mechanical properties were investigated. Both PEI-g-PAA and PEI-g-PHEMA showed better hydrophilicity (WCA decreased from 60 in PEI to 33 and 45, respectively), efficient separation (75-84%) in oil-containing wastewater filtration tests with methyl tert-butyl ether (MTBE) and petroleum ether with a slight decrease in mechanical strength. In addition, bovine serum albumin (BSA) and MTBE were selected as contaminants to examine the antifouling properties. Compared to the flux recovery rate (FRR) of 75% for the original PEI membranes, the grafted membranes almost wholly recovered the permeate flux with a simple backwash of ultrapure water. In summary, the results of the above study suggest the development of a novel and simple preparation strategy for surface grafting modification of PEI membranes, which will facilitate the subsequent research of PEI materials in membrane development, and the resulting grafted membranes will be of developmental and exploratory value in the field of oil and water treatment.