Modeling of Particle Size Distribution in the Presence of Flocculant

This study presents a mathematical description of the solid fraction aggregation process in the presence of a flocculant and its result. The basis is a population balance equation. The model is realized in Python language. Verification was carried out using red mud from the investigated enterprise; Flomin AL P 99 VHM was used as a flocculant. The mean square deviation for the parameter "mean aggregate diameter" is equal to 19.88 mu m. The time required for the model calculation is about 3 min. The time spent on modeling depends on the number of calculation channels. In this study, 40 channels (20 with PSD source data, and 20 with empty values required for the calculation) were used for the calculation. The time spent on the model calculation is much shorter than the inertia via each of the communication channels for the studied symmetric radial type thickener. A user interface is developed, where the input parameters are the initial pulp particle size distribution, viscosity and density of pulp in the thickener, particle surface area, concentration and flow rate of flocculant, concentration of solid particles, inner diameter and height of the feed well, and simulation time. The result of the simulation is particle size distribution in the feed well of the washer and the mean flocculus diameter.