Research on dynamic characteristics and radiation noise of a helicopter main reducer based on finite element and boundary element method

被引:5
|
作者
Zhang, Jingqi [1 ]
Zhou, Jianxing [1 ]
Wang, Shengnan [1 ]
Wang, Haiwei [2 ]
Lu, Fengxia [3 ]
机构
[1] Xinjiang Univ, Coll Mech Engn, Urumqi 830047, Peoples R China
[2] Northwestern Polytech Univ, Sch Mech Engn, Xian 710072, Peoples R China
[3] Nanjing Univ Aeronaut & Astronaut, Natl Key Lab Sci & Technol Helicopter Transmiss, Nanjing 210016, Peoples R China
关键词
Acoustic response; Finite element and boundary element method; Gearbox; Radiated noise; VIBRATION; GEARBOX; IMPROVEMENT;
D O I
10.1007/s12206-023-0807-9
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
In order to solve the problem of radiation noise of helicopter reducer with symmetrical structure, a simulation method is proposed to predict the noise of gearbox of a helicopter reducer from steady dynamic response to the acoustic radiation calculation. Primarily, taking the influence of time-varying stiffness into consideration, the lumped mass model of gear-rotor-bearing system is established. The dynamic load of transmission system is solved by New-Mark-& beta; method, which is regarded as excitation of the gearbox. Then finite element model of housing is established, the radiated noise of the housing is predict by finite element and boundary element method, the influence of multi-source excitation on the radiated noise of the gearbox is analyzed. Finally, the radiated noise of the reducer under different working conditions is explored. All conclusions of this research could provide theoretical reference for vibration and noise reduction of helicopter reducer.
引用
收藏
页码:4489 / 4505
页数:17
相关论文
共 50 条
  • [1] Research on dynamic characteristics and radiation noise of a helicopter main reducer based on finite element and boundary element method
    Jingqi Zhang
    Jianxing Zhou
    Shengnan Wang
    Haiwei Wang
    Fengxia Lu
    Journal of Mechanical Science and Technology, 2023, 37 : 4489 - 4505
  • [2] Research on the Dynamic Characteristics of the Ice Cover Based on the Finite Element Method
    Yang, Kaiyun
    Zhang, Guangyao
    Zhang, Duoxin
    ADVANCES IN ENGINEERING DESIGN AND OPTIMIZATION III, PTS 1 AND 2, 2012, 201-202 : 621 - 624
  • [3] Stress Analysis and Design of Main Reducer Housing Using Finite Element Method
    Wang, S.
    2018 3RD INTERNATIONAL CONFERENCE ON DESIGN AND MANUFACTURING ENGINEERING (ICDME 2018), 2018, 221
  • [4] Joint simulation of radiated noise of electric powertrain based on finite element modeling and boundary element method
    Fang, Yuan
    Zhang, Tong
    Yu, Peng
    Guo, Rong
    Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2014, 30 (21): : 40 - 46
  • [5] Research of the shell vibration and radiated noise based on finite element method
    Sun, Yuting
    Xu, Juan
    Liu, Tong
    PROCEEDINGS OF THE 2015 4TH INTERNATIONAL CONFERENCE ON COMPUTER, MECHATRONICS, CONTROL AND ELECTRONIC ENGINEERING (ICCMCEE 2015), 2015, 37 : 1256 - 1260
  • [6] Analysis of the Key Structures of RV Reducer Based on Finite Element Method
    Song, Lei
    Liang Shunke
    Zheng, Zhenxing
    Chen, Feixin
    2ND INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND APPLIED COMPOSITE MATERIALS, 2019, 544
  • [7] SIMULATION OF THE NOISE RADIATION AND SHIELDING WITH THE BOUNDARY ELEMENT METHOD (BEM)
    Waubke, Holger
    Kasess, Christian H.
    PROCEEDINGS OF THE 23RD INTERNATIONAL CONGRESS ON SOUND AND VIBRATION: FROM ANCIENT TO MODERN ACOUSTICS, 2016,
  • [8] A novel radiation boundary condition for finite-element method
    Liu, Jianguo
    Liu, Cling Huo
    MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2007, 49 (08) : 1995 - 2002
  • [9] Hybridization of a boundary element method with the finite element method in electromagnetics
    Balanis, CA
    Polycarpou, AC
    Vouvakis, MN
    Birtcher, CR
    BOUNDARY ELEMENTS XXIII, 2001, 10 : 195 - 204
  • [10] Symmetric boundary element method versus finite element method
    Panzeca, T
    Cucco, F
    Terravecchia, S
    COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2002, 191 (31) : 3347 - 3367