Effects of temperature on friction and degradation of dry film lubricants during sliding against aluminum alloy sheets

被引：8

作者：

Sabet, Arash Shafiee ^{[1
]}

Domitner, Josef ^{[1
]}

Ristic, Andjelka ^{[2
]}

Oeksuez, Kerem Ilyas ^{[3
]}

Ripoll, Manel Rodriguez ^{[2
]}

Sommitsch, Christof ^{[1
]}

机构：

[1] Graz Univ Technol, Inst Mat Sci Joining & Forming, Res Grp Lightweight & Forming Technol, Inffeldgasse 11-1, A-8010 Graz, Austria

[2] AC2T Res GmbH, Viktor Kaplan Str 2C, A-2700 Wiener Neustadt, Austria

[3] Cosma Engn Europe GmbH, Puchberger Str 267, A-2722 Weikersdorf, Austria

来源：

TRIBOLOGY INTERNATIONAL | 2023年 / 180卷

关键词：

Coefficient of friction; Aluminum alloy; Dry film lubricant; Adhesive wear; TRIBOLOGICAL INVESTIGATIONS; STAMPING LUBRICANTS; METAL; PERFORMANCE; BEHAVIOR; STEEL;

D O I：

10.1016/j.triboint.2022.108205

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Hotmelts are nowadays widely used as dry film lubricants (DFL) in aluminum sheet forming. However, their chemical composition and the degradation of functional additives during the forming process are rarely reported. The present work investigates the chemical composition of three hotmelts deposited on aluminum alloy sheets with electrical discharge-textured (EDT) and mill-finished (MF) surfaces using mass spectrometry (MS), X-ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA). The surface topographies and the tribological conditions were investigated at temperatures between room temperature and 100 degrees C using single-pass sliding experiments. The results show considerable change of the tribological conditions due to reduction of friction modifiers and antiwear additives during sliding particularly at 100 degrees C.

引用

页数：12

共 50 条

[1] Friction and wear characteristics of ZDDP in the sliding of steel against aluminum alloy
Wan, Y
Cao, LL
Xue, QJ
TRIBOLOGY INTERNATIONAL, 1997, 30 (10) : 767 - 772
[2] Dry Sliding Wear Study of Solid Lubricants and Sillimanite-Reinforced Aluminum Alloy Composites
Singhal, Varun
Pandey, O. P.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (11) : 8369 - 8384
[3] Dry Sliding Wear Study of Solid Lubricants and Sillimanite-Reinforced Aluminum Alloy Composites
Varun Singhal
O. P. Pandey
Journal of Materials Engineering and Performance, 2021, 30 : 8369 - 8384
[4] High-temperature friction and wear properties of various sliding materials against aluminum alloy 5052
Murakami, T.
Kajino, S.
Nakano, S.
TRIBOLOGY INTERNATIONAL, 2013, 60 : 45 - 52
[5] Thermal effects on mild wear transitions in dry sliding of an aluminum alloy
Wilson, S
Alpas, AT
WEAR, 1999, 225 : 440 - 449
[6] ON MECHANICAL MIXING DURING DRY SLIDING OF ALUMINUM-12.3WT.PERCENT SILICON ALLOY AGAINST COPPER
SUBRAMANIAN, C
WEAR, 1993, 161 (1-2) : 53 - 60
[7] Wear Resistance of Coated SAE 305 Aluminum Alloy Under Dry Friction Reciprocate Sliding
M. S. T. Pires
T. Doca
V. F. Steier
W. M. da Silva
M. M. Oliveira Júnior
Tribology Letters, 2018, 66
[8] Wear Resistance of Coated SAE 305 Aluminum Alloy Under Dry Friction Reciprocate Sliding
Pires, M. S. T.
Doca, T.
Steier, V. F.
da Silva, W. M.
Oliveira Junior, M. M.
TRIBOLOGY LETTERS, 2018, 66 (02)
[9] Grain boundary sliding during friction stir spot welding of an aluminum alloy
Gerlich, A. P.
Shibayanagi, T.
SCRIPTA MATERIALIA, 2009, 60 (04) : 236 - 239
[10] Low-temperature annealing effects on friction and wear performance of nanotwinned copper dry sliding against zirconia
Zheng, Zhidong
Peng, Zhimin
Huang, Weijie
Mai, Yongjin
Guo, Fujian
WEAR, 2025, 568

← 1 2 3 4 5 →