Evaluation of a New Process for the Additive Manufacturing of Metal Antennas

被引：0

作者：

Arroyave, German A. Ramirez ^{[1
]}

Huertas, David L. Galindo ^{[2
]}

Cuervo, Daniel F. Garzon ^{[2
]}

Cerquera, Manuel R. Perez ^{[3
]}

Quintero, Liz K. Herrera ^{[2
]}

Quijano, Javier L. Araque ^{[2
]}

机构：

[1] Ecole Polytech Fed Lausanne EPFL, Lausanne, Switzerland

[2] Univ Nacl Colombia, Bogota, Colombia

[3] Pontificia Univ Javieriana, Bogota, Colombia

来源：

PROGRESS IN ELECTROMAGNETICS RESEARCH M | 2023年 / 117卷

关键词：

SHAPED MONOPOLE ANTENNA;

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

This paper presents a new process for additively manufacturing purely metallic antennas based on Fused Deposition Modeling (FDM), with a proprietary filament developed using a hot extrusion method and composed by a mix of rounded shape copper powders with particle sizes in the range from 20 to 80 mu m embedded in a polymeric matrix, to accomplish the desired antenna shape; followed by a post-processing stage involving de-binding to remove the base polymer and a further sintering process for obtaining a purely metallic component. This new process is validated by means of a prototype antenna consisting on a modified tri-band cactus monopole that is manufactured and measured, exhibiting results in agreement with standard and alternative additive manufacturing techniques reported in the literature.

引用

页码：59 / 69

页数：11

共 50 条

[1] Evaluation of a New Process for the Additive Manufacturing of Metal Antennas
Ramírez Arroyave G.A.
Galindo Huertas D.L.
Garzón Cuervo D.F.
Pérez Cerquera M.R.
Herrera Quintero L.K.
Araque Quijano J.L.
Progress In Electromagnetics Research M, 2023, 117 : 59 - 69
[2] Material selection for metal additive manufacturing process
Malaga, Anil Kumar
Agrawal, Rohit
Wankhede, Vishal Ashok
MATERIALS TODAY-PROCEEDINGS, 2022, 66 : 1744 - 1749
[3] Solidification and process optimization in metal additive manufacturing
Koizumi Y.
Koizumi, Yuichiro, 1600, Japan Institute of Electronics Packaging (23): : 446 - 451
[4] A Framework for Process Inspection of Metal Additive Manufacturing
Cheng, Chih-Kun
Liou, Frank
Cheng, Yi-Chien
Shen, Sheng-Chih
SENSORS AND MATERIALS, 2019, 31 (02) : 411 - 420
[5] Metal additive manufacturing as industrial production process
Lamikiz-Mentxaka, Aitzol
Ukar-Arrien, Eneko
DYNA, 2020, 95 (04): : 343 - 344
[6] Development of a New Cold Metal Transfer Arc Additive Die Manufacturing Process
Zhang, An
Xing, Yanfeng
Yang, Fuyong
Zhang, Xiaobing
Wang, Hongze
Yu, Tiejun
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2021, 2021
[7] Development of a new cold metal transfer arc additive die manufacturing process
Zhang, An
Xing, Yanfeng
Yang, Fuyong
Zhang, Xiaobing
Wang, Hongze
Yu, Tiejun
Xing, Yanfeng (smsmsues@163.com), 2021, Hindawi Limited (2021)
[8] A new design for additive manufacturing method: applied on the bound metal deposition process
Mechter, Mohamed Akram
Mace, Yann
Kerbrat, Olivier
JOURNAL OF ENGINEERING DESIGN, 2022, 33 (10) : 787 - 810
[9] Planar Monopole Antennas on Substrates Fabricated Through an Additive Manufacturing Process
Saintsing, Christy D.
Yu, Kai
Qi, H. Jerry
Tentzeris, Manos
2015 IEEE RADIO AND WIRELESS SYMPOSIUM (RWS), 2015, : 159 - 161
[10] Product Manufacturing Process that Takes Advantage of the Benefits by Metal Additive Manufacturing
Masuo H.
Yosetsu Gakkai Shi/Journal of the Japan Welding Society, 2023, 92 (06): : 414 - 418

← 1 2 3 4 5 →