Phase modulation of carriers for cascaded multilevel three-phase inverters

Cascaded multilevel three-phase inverters are commonly used in industrial applications and the quality of these inverters is highly dependent on the modulation techniques. The common mode voltage is one of the factors affecting the quality of the three-phase inverter output voltage. This paper proposes a carrier phase modulation method for cascade multilevel inverters to reduce the magnitude of common-mode voltage magnitude and harmonics. In the proposed method, the carrier phase modulator is considered as an adaptive controller and the phase of carrier is completely controlled by the magnitude of control signal. The phase modulation has a high immunity to the noises compared with the modulations of frequency and amplitude because it is difficult for noises to intrude into the phase of carrier. In addition, the algorithm of carrier phase modulation is simple and requires little memory. Moreover, the number of switching commutations of the proposed method also reduces significantly. Simulation and experiment results based on a cascaded five-level three-phase inverter system have confirmed the effectiveness of the proposed method compared with that of the popular methods using unmodulated carriers such as phase disposition (PD) and phase opposite disposition ( POD).