Experimental and numerical validation of a hybrid method for modelling the wake flow of two in-line wind turbines

To forecast the wake flow and power reduction affecting downstream turbines reliably and accurately, a hybrid wake model CFD(ALM)-IDWM was improved, in which the forecasting of V theta max is improved from linear to cubic. Then, a partially overlapping computational domain is added behind the far-wake domain of upstream wind turbine to calculate the aerodynamic performance of a downstream wind turbine, and the numerical model of full CFD(ALM) and CFD(ALM)-IDWM for two in-line wind turbines are developed. Subsequently, a wind tunnel model test on two in-line wind turbines was carried out to validate the full CFD(ALM) model firstly. Subsequently, the hybrid model of CFD(ALM)-IDWM is numerically validated by the full CFD(ALM) simulations. The results show that CFD(ALM)-IDWM cannot only predict the wake characteristics such as vortices and wakes in the wake region more accurately, but can also accurately simulate the average values of the downstream turbine thrust and torque. By ignoring certain flow field details including acceleration, turbulent viscosity, and Reynolds stress during the simulation process, the computational time is reduced. Base on the same CFD(ALM), the computation time of CFD(ALM)-IDWM was approximately 60% of that of full CFD(ALM). The longer the computational domain of IDWM, the greater reduction in computational time.