Synergistic interactions between sewage sludge, polypropylene, and high-density polyethylene during co-pyrolysis: An investigation based on iso-conversional model-free methods and master plot analysis

Sewage sludge (SS) is a hazardous by-product of wastewater treatment processes that requires careful management for minimal environmental impacts and effective resource recovery. Through thermochemical processes such as pyrolysis, clean energy is recovered from SS in the form of bio-oil, biogas, and biochar. To improve the yield and quality of products, the co-pyrolysis of more than two materials is increasingly gaining interest. Here, the thermal behaviour, kinetics, and synergistic interactions during the co-pyrolysis of SS with polypropylene (PP) and highdensity polyethylene (HDPE) were comparatively evaluated with thermogravimetric analysis at different mixing ratios and heat rates. Activation energies and reaction mechanisms were determined through iso-conversional modelfree methods and master plot analysis. Evolved gases were monitored with thermogravimetric-mass spectrometry. Increased volatile conversion and degradation rates, and reduced activation energies during co-pyrolysis were mediated by synergistic interactions between H-radicals of PP/HDPE and oxygenated intermediates of SS. Contrary to the pyrolysis of SS, PP and HDPE, the co-pyrolysis processes are predominantly diffusion-controlled. Insights into the co-pyrolysis processes of SS/PP and SS/HDPE gained from this work provide the theoretical support for subsequent investigation, facilitate design of waste-to-energy reactor, and aid the adoption of the technology to harness the bioenergy potential of the feedstocks.