Automatic Piston-Type Flow Standard Device Calibration System

被引:0
|
作者
Song, Xinming [1 ]
Wang, Xiaoli [1 ]
Ma, Min [1 ]
机构
[1] Shandong Univ, Sch Mech Elect & Informat Engn, Weihai 264200, Peoples R China
关键词
flow calibration; piston-type flow standard device; flow point calibration algorithm; uncertainty assessment; 93-10;
D O I
10.3390/math11183802
中图分类号
O1 [数学];
学科分类号
0701 ; 070101 ;
摘要
Measurement of flow is crucial for assuring product quality, increasing manufacturing effectiveness, and promoting the development of science and technology. With the advancement of calibration and automation, standard devices using the mass method, volumetric method, and master meter method have limitations, such as low calibration efficiency and automation, large size, and complex operation. Innovations in this area are desperately needed. To realize the automation of calibrating ultrasonic water meters, a piston-type flow standard device calibration system with a high degree of automation, high calibration efficiency, small size, and easy operation was designed. A piston-type flow standard device was designed, the standard device was modeled, the selection of the main hardware and the design of the automated control of the hardware parts were completed; an automation control system adapted to the flow standard device was developed; and, furthermore, a water meter flow point calibration algorithm integrating the start-stop method and the dual-time method, as well as a water meter flow correction algorithm, was devised to improve the efficiency of ultrasonic water meter calibration. An uncertainty assessment of the designed system was completed; the standard uncertainty and expanded uncertainty of the device were 0.013% and 0.026%. Meanwhile, flow calibration tests were conducted, validating the rationality of the automated calibration algorithm for ultrasonic water meters. The results show that ultrasonic water meters calibrated with flow correction have a flow error within +/- 3% in the "low flow range" and within +/- 2% in the "high flow range", with a repeatability of less than 0.05%. This indicates that a piston-type flow standard device, coupled with an automation calibration control system, can efficiently, accurately, and conveniently perform water meter calibration, and the system has good practical value.
引用
收藏
页数:19
相关论文
共 50 条
  • [1] WARNING SYSTEM FOR PISTON-TYPE RESPIRATOR
    WILGER, RN
    MYERS, RA
    DUFFY, JP
    DUNN, AL
    [J]. ANESTHESIOLOGY, 1966, 27 (04) : 509 - &
  • [2] Effects of Intake Flow Rate on Powder Fluidization and Conveying in a Piston-Type Powder Feeding Device
    Ren, Guanlong
    Sun, Haijun
    Xu, Yihua
    [J]. Binggong Xuebao/Acta Armamentarii, 2023, 44 (10): : 2906 - 2919
  • [3] Computations of the flow characteristics of a rotating piston-type flowmeter
    Wojtkowiak, J
    Kim, WN
    Hyun, JM
    [J]. FLOW MEASUREMENT AND INSTRUMENTATION, 1997, 8 (01) : 17 - 25
  • [4] A PISTON-TYPE NONREBREATHING VALVE
    NEWTON, GW
    NOWILL, WK
    STEPHEN, CR
    [J]. ANESTHESIOLOGY, 1955, 16 (06) : 1037 - 1038
  • [5] AUTOMATIC LOADING MECHANISM IN PISTON-TYPE LOAD-CARRYING INSTRUMENTS
    SPIRIDONOV, EI
    TUROVSKII, VA
    [J]. MEASUREMENT TECHNIQUES, 1975, 18 (10) : 1469 - 1470
  • [6] PISTON-TYPE SPHERICAL RADIATION
    MOLLOY, CT
    MILLER, KL
    [J]. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 1967, 41 (06): : 1606 - +
  • [7] A piston-type active absorbing wavemaker system with delay compensation
    Yang Hong-qi
    Li Mu-guo
    Liu Shu-xue
    Zhang Qun
    Wang Jing
    [J]. CHINA OCEAN ENGINEERING, 2015, 29 (06) : 917 - 924
  • [8] A piston-type active absorbing wavemaker system with delay compensation
    Hong-qi Yang
    Mu-guo Li
    Shu-xue Liu
    Qun Zhang
    Jing Wang
    [J]. China Ocean Engineering, 2015, 29 : 917 - 924
  • [9] A PISTON-TYPE POROUS WAVEMAKER THEORY
    CHWANG, AT
    LI, W
    [J]. JOURNAL OF ENGINEERING MATHEMATICS, 1983, 17 (04) : 301 - 313
  • [10] A Piston-Type Active Absorbing Wavemaker System with Delay Compensation
    杨洪齐
    李木国
    柳淑学
    张群
    王静
    [J]. China Ocean Engineering, 2015, 29 (06) : 917 - 924