Simulation of δ-phase precipitation behavior in hot compression deformation of inconel 718 superalloy

被引：0
|
作者：
Kong, Xiangwei [1 ]
Jin, Zhibo [1 ]
Liu, Gongyu [1 ]
Zhou, Fenglu [1 ]
Ma, Liang [1 ]
机构：
[1] Northeastern Univ, Sch Mech Engn & Automat, Shenyang, Peoples R China
来源：
MATERIALS RESEARCH EXPRESS | 2024年 / 11卷 / 02期
关键词：
delta phase precipitation; Ni-based superalloy; cellular automata; hot compression deformation; NI-BASED SUPERALLOY; DYNAMIC RECRYSTALLIZATION; KINETICS;
D O I：
10.1088/2053-1591/ad21af
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A model for delta-phase precipitation in Inconel 718 superalloy during hot working, grounded in experimental data, was developed. A Cellular Automata (CA) simulation platform was designed to simulate the precipitation of second-phase particles in the alloy. The delta-phase precipitation behavior of Inconel 718 alloy during hot aging and hot compression was simulated. The results revealed that during hot aging, delta-phase initially precipitated on grain boundaries as particles and short rods, followed by the formation of long needle-like delta-phase with similar growth direction within grains. During hot compression deformation, flat needle-like delta-phase gradually dissolved and transformed into short rods and granular forms dispersed around grain boundaries as thermal deformation temperature increased. The simulation results for delta-phase content, morphology, and distribution were in good agreement with experimental results, demonstrating the model's strong predictive potential for second-phase evolution.
引用
收藏
页数：10
相关论文
共 50 条
  • [1] Effect of the δ phase on the hot deformation behavior of Inconel 718
    Yuan, H
    Liu, WC
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 408 (1-2): : 281 - 289
  • [2] Precipitation of δ phase in Inconel 718 superalloy: The role of grain boundary and plastic deformation
    Guan, Hao
    Jiang, Wenxiang
    Lu, Junxia
    Zhang, Yuefei
    Zhang, Ze
    [J]. MATERIALS TODAY COMMUNICATIONS, 2023, 36
  • [3] Hot deformation behavior and constitutive modeling of fine grained Inconel 718 superalloy
    [J]. Zhao, F. (fzhao@gzu.edu.cn), 1600, Elsevier Ltd (741):
  • [4] Hot deformation behavior and constitutive modeling of fine grained Inconel 718 superalloy
    Tan, Y. B.
    Ma, Y. H.
    Zhao, F.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 741 : 85 - 96
  • [5] Study of pre-precipitated 8 phase promoting deformation twinning and recrystallization behavior of Inconel 718 superalloy during hot compression
    Jiang, Wenxiang
    Lu, Junxia
    Guan, Hao
    Wang, Mingming
    Cheng, Xiaopeng
    Liu, Linlin
    Liu, Xianqiang
    Wang, Jin
    Zhang, Yuefei
    Zhang, Ze
    Lin, Weitong
    Hu, Jing
    [J]. MATERIALS & DESIGN, 2023, 226
  • [6] Cyclic deformation mechanisms of precipitation-hardened Inconel 718 superalloy
    Xiao, L.
    Chen, D. L.
    Chaturvedi, M. C.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 483-84 (369-372): : 369 - 372
  • [7] Deformation Mechanism of L12-γ′ Phase in Bimodal γ"-γ′ Precipitation Hardened Inconel 718 Superalloy
    Zhang, Hongjun
    Li, Chong
    Guo, Qianying
    Li, Huijun
    Liu, Yongchang
    [J]. ADVANCED ENGINEERING MATERIALS, 2018, 20 (11)
  • [8] Deformation mechanisms and fatigue behavior of prestrained Inconel 718 superalloy
    Kalluri, S
    Rao, KBS
    Halford, GR
    McGaw, MA
    [J]. SUPERALLOYS 718, 625, 706 AND VARIOUS DERIVATIVES, 1996, : 595 - 606
  • [9] The Precipitation Behavior and Hot Deformation Characteristics of Electron Beam Smelted Inconel 740 Superalloy
    Xiaogang You
    Yi Tan
    Chang Wu
    Qifan You
    Longhai Zhao
    Jiayan Li
    [J]. Journal of Materials Engineering and Performance, 2018, 27 : 1580 - 1591
  • [10] The Precipitation Behavior and Hot Deformation Characteristics of Electron Beam Smelted Inconel 740 Superalloy
    You, Xiaogang
    Tan, Yi
    Wu, Chang
    You, Qifan
    Zhao, Longhai
    Li, Jiayan
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (04) : 1580 - 1591
12345