A material degradation study of novel FeCrAl alloys, stainless steels and nickel base alloy in fluidized bed heat exchangers of a waste-fired CFB boiler

被引：6

作者：

Lindmark, Hampus ^{[1
]}

Phother, Julien ^{[1
]}

Olausson, Maria Dolores Paz ^{[1
]}

Nockert, Johanna ^{[2
]}

Lind, Fredrik ^{[3
]}

Jonasson, Anna ^{[3
]}

Barisic, Vesna ^{[4
]}

Vanska, Kyosti ^{[4
]}

Rioja-Monllor, Laura ^{[5
]}

Liske, Jesper ^{[1
]}

机构：

[1] Chalmers Univ Technol, Dept Chem & Chem Engn, Energy & Mat, SE-41296 Gothenburg, Sweden

[2] Kanthal AB, SE-73427 Hallstahammar, Sweden

[3] E On Energy Infrastructure AB, SE-20509 Malmo, Sweden

[4] Sumitomo SHI FW, FI-78201 Varkaus, Finland

[5] Alleima AB, SE-81181 Sandviken, Sweden

来源：

FUEL | 2023年 / 338卷

关键词：

Waste -fired boiler; Loop seal; High -temperature corrosion; FeCrAl alloys; Austenitic alloys; Ni-base alloy; HIGH-TEMPERATURE CORROSION; MODEL ALLOYS; 600-DEGREES-C; OXIDATION; EROSION; SI;

D O I：

10.1016/j.fuel.2022.127299

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

This study aimed to evaluate the material degradation resistance of two newly developed FeCrAl alloys exposed within the loop seal region of an 85 MWth waste-fired CFB boiler in Sweden. In addition to the FeCrAl alloys, two commercial austenitic stainless steel and one nickel base (Ni-base) alloy were also studied. The samples were exposed for 6 and 12 months by clamping half-moon rings onto tubes of the installed superheater bundle, achieving a material temperature of 500-520 degrees C. The material degradation of the samples was assessed by evaluating material loss using an ultrasonic thickness gauge in combination with a scanning electron microscope (SEM). Microstructural analysis was carried out using SEM coupled with Energy-dispersive X-ray spectroscopy (EDX). Both FeCrAl alloys showed promising results achieving material losses in the same range as the investigated austenitic stainless steels and the Ni-base alloy. A thin inward-growing Cr/Al-rich and thick outward-growing Fe -rich oxide were present for the FeCrAl alloys, and an internal nitridation zone was formed in the material matrix close to the metal/oxide interphase. The material loss and extent of the corrosion attack for the austenitic stainless steels varied depending on the alloy composition. However, the corrosion attack remained similar, as all the austenitic steels suffered from internal and intergranular corrosion. For the Ni-base alloy, the attack was defined by an internal Cr-rich oxide formation with no intergranular corrosion. This study suggests that the novel FeCrAl alloys provide satisfying resistance towards corrosion and erosion of the fluidized bed heat exchangers in the loop seal region of a waste-fired boiler. In addition, the stainless steel SX and the Ni-base alloy Sanicro (R) 69 performed well. Furthermore, the results revealed that corrosion rather than erosion was the dominating degradation process of the investigated samples, as deposit formation was observed on most of the samples as well as corrosion product layers. Thus, the erosive aspect of the attack was expected to be minor.

引用

页数：8