Manufacturing of pedestal supporting error field correction coil in JT-60SA

被引：0
|
作者：
Nakamura, Shigetoshi [1 ]
Matsunaga, Go [1 ]
Takechi, Manabu [1 ]
Tsuru, Daigo [1 ]
Yamamoto, Satoshi [1 ]
Isayama, Akihiko [1 ]
机构：
[1] Natl Inst Quantum Sci & Technol, Chiba, Japan
来源：
FUSION ENGINEERING AND DESIGN | 2023年 / 194卷
关键词：
Error field correction coil; Electromagnetic force; Thermal displacement; JT-60SA;
D O I：
10.1016/j.fusengdes.2023.113713
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
Eighteen error field correction coils (EFCCs) consisting of copper conductor and epoxy resin are installed in the vacuum vessel of JT-60SA in order to correct magnetic fields caused by manufacturing and installation errors of superconducting coils. Pedestals consisting of plate and spring bars for supporting the EFCCs were designed to withstand electromagnetic force during plasma operations and allow relative displacement between the EFCC at 40 degrees C and the vacuum vessel at 200 degrees C during baking operations. Feasibility of fixing the ends of the spring bars to the plates with plug welding and clearance of 50 mu m was investigated using mechanical load test and trial manufacturing. Design for manufacturing was decided based on the results. Structural integrity of the design was confirmed through structural analysis with finite element method (FEM). Manufacturing of the pedestals has successfully completed.
引用
收藏
页数：7
相关论文
共 50 条
  • [1] Structural design of pedestal for error field correction coil in JT-60SA
    Nakamura, Shigetoshi
    Matsunaga, Go
    Takechi, Manabu
    Tsuru, Daigo
    Yamamoto, Satoshi
    Itashiki, Yutaro
    Hayashi, Takao
    Isayama, Akihiko
    FUSION ENGINEERING AND DESIGN, 2021, 170
  • [2] Thermal and Mechanical Design of Error Field Correction Coil for JT-60SA
    Murakami, H.
    Matsunaga, G.
    Takechi, M.
    Sukegawa, A.
    Sakurai, S.
    Kizu, K.
    Tsuchiya, K.
    Koide, Y.
    Yoshida, K.
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2016, 26 (04)
  • [3] A Conceptual Design Study for the Error Field Correction Coil Power Supply in JT-60SA
    MMATSUKAWA
    KSHIMADA
    KYAMAUCHI
    EGAIO
    AFERRO
    LNOVELLO
    Plasma Science and Technology, 2013, 15 (03) : 257 - 260
  • [4] A Conceptual Design Study for the Error Field Correction Coil Power Supply in JT-60SA
    Matsukawa, M.
    Shimada, K.
    Yamauchi, K.
    Gaio, E.
    Ferro, A.
    Novello, L.
    PLASMA SCIENCE & TECHNOLOGY, 2013, 15 (03) : 257 - 260
  • [5] A Conceptual Design Study for the Error Field Correction Coil Power Supply in JT-60SA
    M.MATSUKAWA
    K.SHIMADA
    K.YAMAUCHI
    E.GAIO
    A.FERRO
    L.NOVELLO
    Plasma Science and Technology, 2013, (03) : 257 - 260
  • [6] In-vessel coils for magnetic error field correction in JT-60SA
    Matsunaga, G.
    Takechi, M.
    Sakurai, S.
    Suzuki, Y.
    Ide, S.
    Urano, H.
    FUSION ENGINEERING AND DESIGN, 2015, 98-99 : 1113 - 1117
  • [7] Technical aspects and manufacturing methods for JT-60SA toroidal field coil casings
    ENEA, Via Enrico Fermi 45, 00044 Frascati, Rome, Italy
    不详
    不详
    Fusion Eng Des, 7-8 (965-969):
  • [8] Technical aspects and manufacturing methods for JT-60SA toroidal field coil casings
    Rossi, Paolo
    Cucchiaro, A.
    Brolatti, G.
    Cocilovo, V.
    Ginoulhiac, G.
    Polli, G.
    Gabriele, M.
    Di Muzio, F.
    Philips, G.
    Tomarchio, V.
    FUSION ENGINEERING AND DESIGN, 2014, 89 (7-8) : 965 - 969
  • [9] Manufacturing Status of JT-60SA Toroidal Field Coils
    Phillips, G.
    Barabaschi, P.
    Davis, S.
    Di Pietro, E.
    Hajnal, N.
    Tomarchio, V.
    Verrecchia, M.
    Wanner, M.
    Zani, L.
    Decool, P.
    Disset, G.
    Genini, L.
    Marechal, J. L.
    Cucchiaro, A.
    Polli, G. M.
    Rossi, P.
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2014, 24 (03)
  • [10] Design and manufacturing of resistive wall mode control coil of JT-60SA
    Takechi, M.
    Itashiki, Y.
    Murakami, H.
    Sukegagwa, A.
    Tsuru, D.
    Nakamura, S.
    Yamamoto, S.
    Iijima, T.
    Isayama, A.
    FUSION ENGINEERING AND DESIGN, 2023, 197
12345