The origin and compositions of melt inclusions in an Al2SiO5-free paragneiss from the Namche Barwa Complex in the Eastern Himalayan Syntaxis

Melt inclusions (MIs) in high-temperature metamorphic rocks provide a unique window into crustal anatexis in collisional orogenic belts and have been widely used to characterize compositions of anatectic melts as well as melting mechanisms. In this study, MIs hosted by peritectic garnet were for the first time identified in an Al2SiO5-free graywacke-type paragneiss from the Namche Barwa Complex, the Eastern Himalaya, Southeast Tibet. These MIs occur as nanogranites in the rims of porphyroblastic garnet, exhibit negative crystal shapes with an average diameter of similar to 12 mu m and consist of a mineral assemblage of biotite + quartz + plagioclase + K-feldspar +/- muscovite. Re-homogenization experiments of these nanogranites were conducted at a pressure of 1.5 GPa and temperatures of 800 degrees C, 850 degrees C and 900 degrees C and produced homogeneous glasses at 850 degrees C. The homogenized glasses are strongly peraluminous and calc-alkalic in composition, with 66.43-71.31 wt.% SiO2, 12.64-15.06 wt.% Al2O3, high alkaline (5.41-7.22 wt.%) and low ferromagnesian (2.72-4.46 wt.%) contents. They are lower in silica and CaO but higher in K2O compared with MI produced by fluid-present melting of metasedimentary rocks, thus indicating fluid-absent melting. These glasses are also characterized by enrichment of large ion lithophile elements (particularly Cs and Rb), depletion of Ba and Sr, low contents of light rare earth elements (3.6 to 33.7 ppm), high Rb/Sr ratios (6.19-37.3) and low Nb/Ta ratios (2.55-18.7). In combination with phase equilibrium modelling, these compositional features suggest that a sequential dehydration melting of muscovite and biotite was responsible for the production of MI during prograde metamorphism of the studied paragneiss. By compiling MI data published in the literature, we show that dehydration melting of metasedimentary rocks from the Himalayan orogen can produce initial melts with various peraluminous and granitic compositions.