Application of linguistic fuzzy neural network to landing control

被引:0
|
作者
Chien, Li-Hsiang [1 ]
Juang, Jih-Gau [2 ,3 ]
机构
[1] Qisda Corp, Taoyuan, Taiwan
[2] Natl Taiwan Ocean Univ, Keelung, Taiwan
[3] Natl Taiwan Ocean Univ, 2 Pei-Ning Rd, Keelung 20224, Taiwan
关键词
Aircraft landing control; wind disturbance; linguistic fuzzy neural network; adaptive learning; Lyapunov theory; DESIGN;
D O I
10.1177/16878132241227115
中图分类号
O414.1 [热力学];
学科分类号
摘要
Most aircraft accidents occurred during the final approach. Wind disturbance is one of the significant factors in these accidents. During the landing phase, the Automatic Landing System (ALS) can help aircraft land safely and significantly reduce the pilot's work loading. Control schemes of the conventional ALS usually use gain-scheduling and traditional PID control techniques. A traditional controller cannot control the aircraft if the weather conditions are beyond the allowed limits. To improve the performance of the landing control, this study applies a linguistic fuzzy neural network (LFNN) to replace the conventional controller of ALS. Adaptive learning rules are proposed to enhance the LFNN control ability. The method used to obtain adaptive learning rules is the Lyapunov stability theory. Moreover, the convergence of the system performance error is proved by the Lyapunov theory. This study also compares previously proposed control schemes in aircraft landing control. Different turbulence strengths are implemented into the flight simulation to make the proposed controller more robust and adaptive to various wind disturbance conditions. The LFNN controller can successfully overcome 75 ft/s wind speed, while the adaptive LFNN can reach 80 ft/s with optimal learning rates. Using optimal convergence theorems, the proposed controller performs better than the controllers trained by a fixed learning rate.
引用
收藏
页数:10
相关论文
共 50 条
  • [1] Adaptive Fuzzy Neural Network Control for Automatic Landing System
    Juang, Jih-Gau
    Chien, Li-Hsiang
    [J]. COMPUTATIONAL COLLECTIVE INTELLIGENCE: TECHNOLOGIES AND APPLICATIONS, PT I, 2010, 6421 : 520 - 530
  • [2] Application of time delay neural network to automatic landing control
    Juang, JG
    Chang, HH
    [J]. PROCEEDINGS OF THE 2002 IEEE INTERNATIONAL CONFERENCE ON CONTROL APPLICATIONS, VOLS 1 & 2, 2002, : 150 - 155
  • [3] Application of generalised neural network for aircraft landing control system
    D. K. Chaturvedi
    R. Chauhan
    P. K. Kalra
    [J]. Soft Computing, 2002, 6 (6) : 441 - 448
  • [4] Dual Fuzzy Neural Network Control in Civil Aviation Intelligent Landing System
    Xu, Kaijun
    Zhang, Guangming
    Xu, Yang
    [J]. ARTIFICIAL INTELLIGENCE AND COMPUTATIONAL INTELLIGENCE, PT II, 2011, 7003 : 166 - +
  • [5] Application of neural network based fuzzy logic control in the network congestion control
    Yin Feng-jie
    Jing Yuan-wei
    [J]. PROCEEDINGS OF 2005 CHINESE CONTROL AND DECISION CONFERENCE, VOLS 1 AND 2, 2005, : 1291 - 1294
  • [6] A merged fuzzy-neural network and its application in fuzzy-neural control
    Li, I-Hsum
    Wang, Wei-Yen
    Su, Shun-Fen
    Chen, Ming-Chang
    [J]. 2006 IEEE INTERNATIONAL CONFERENCE ON SYSTEMS, MAN, AND CYBERNETICS, VOLS 1-6, PROCEEDINGS, 2006, : 4529 - 4534
  • [7] A Novel Dual Fuzzy Neural Network to Civil Aviation Aircraft Disturbance Landing Control
    Xu, Kaijun
    [J]. COMMUNICATIONS AND INFORMATION PROCESSING, PT 2, 2012, 289 : 131 - 139
  • [8] Control algorithms of fuzzy neural network and their application in automatic train control
    Wu, Y
    Zhang, LM
    [J]. 8TH INTERNATIONAL CONFERENCE ON NEURAL INFORMATION PROCESSING, VOLS 1-3, PROCEEDING, 2001, : 951 - 956
  • [9] The application of fuzzy neural network for contamination control of hydraulic oil
    Xu, Y
    Wang, XZ
    Wang, J
    Li, J
    [J]. 1997 IEEE INTERNATIONAL CONFERENCE ON INTELLIGENT PROCESSING SYSTEMS, VOLS 1 & 2, 1997, : 322 - 324
  • [10] Application of fuzzy neural network in direct torque control system
    Fan, Liping
    Li, Bin
    [J]. 2007 IEEE INTERNATIONAL CONFERENCE ON CONTROL AND AUTOMATION, VOLS 1-7, 2007, : 282 - 287