Synthesis and characterization of chitosan/polyvinyl alcohol immersed in sodium hydroxide thin film as a heterogeneous catalyst in biodiesel production

Biodiesel is a potential renewable energy source that can be used to replace fossil fuels because of its low toxicity, biodegradability, and renewability. However, biodiesel production requires long reaction times. Hence, a catalyst is needed to speed up the reaction and optimize production conditions. CS/PVA thin film catalyst immersed in NaOH has intriguing catalytic properties that can improve biodiesel conversion efficiency. In this paper, a series of chitosan/polyvinyl alcohol-sodium hydroxide (CS/PVA-NaOH) thin films have been prepared as heterogeneous catalysts in biodiesel production. According to the FTIR spectra data, It shows that the vibrational frequency of the hydroxyl group (-OH) shifted from 3271 cm(-1) to 3290 cm(-1), indicating the hydrogen bond interaction between chitosan and PVA. Water uptake (45.42-218.64 %), swelling (120.63-142.99 %), porosity (62.67-243.43 %), and the durability of the thin film at pH conditions of 5-11 have been found to be the physicochemical characteristics of blended Chitosan/PVA (4/1; 3/2; 2.5/2.5; 2/3; 1/4 (v/v)). The optimal conditions for producing biodiesel were found to be around 65 degrees C for 90 min with an oil: methanol molar ratio of 1:7. By using a heterogeneous catalyst of CS/PVA-NaOH, the conversion efficiency from oil to biodiesel was achieved at around 95.39-99.52 %.