Retention of noble and rare isotope gases in plasma-facing components-Experience from the JET tokamak with the ITER-like wall

被引:1
|
作者
Dittrich, Laura [1 ]
Petersson, Per [1 ]
Moon, Sunwoo [1 ]
Rubel, Marek [1 ]
Tran, Tuan Thien [2 ]
Widdowson, Anna [3 ]
机构
[1] KTH Royal Inst Technol, Fus Plasma Phys, S-10044 Stockholm, Sweden
[2] Uppsala Univ, Dept Phys & Astron, S-75120 Uppsala, Sweden
[3] Culham Ctr Fus Energy, Abingdon OX14 3DB, Oxon, England
基金
瑞典研究理事会;
关键词
Plasma -wall interactions; Seeded gases; Plasma -facing materials; JET tokamak; ITER-like wall; DEUTERIUM;
D O I
10.1016/j.fusengdes.2023.113620
中图分类号
TL [原子能技术]; O571 [原子核物理学];
学科分类号
0827 ; 082701 ;
摘要
Plasma edge cooling, ion cyclotron wall conditioning and disruption mitigation techniques involve massive gas injection (by puffs or pellets) to the torus. A certain fraction remains in plasma-facing components (PFC) due to co-deposition and implantation. An uncontrolled release/desorption of such retained species affects the stability of plasma operation. The aim of this work was to determine the lateral and depth distribution of noble (3He, 4He, Ne, Ar), seeded (N2, Ne, Ar) and tracer gases (15N, 18O) in PFC retrieved from the JET tokamak with the ITER-Like Wall (JET-ILW) after three experimental campaigns (ILW-1, ILW-2, ILW-3). Results regarding the retention of those gases are shown as well as a comparison to the deuterium retention in the studied areas. Heavy ion elastic recoil detection analysis was used, being the only technique capable of detection and quantitative assessment of all elements, especially low-Z isotopes. Helium was found on the divertor Tile 5, locally up to 44.1015 3He cm-2 and 12.1015 4He cm-2, and on the limiters as well. Neon was found in two positions on the limiters, with up to 10.1015 Ne cm-2 and the 15N tracer on Be limiters exposed to ILW-3. A correlation of N retention with the N seeding rates for each campaign has also been found.
引用
下载
收藏
页数:9
相关论文
共 18 条
  • [1] Beryllium plasma-facing components for the ITER-Like Wall Project at JET
    Rubel, M. J.
    Bailescu, V.
    Coad, J. P.
    Hirai, T.
    Likonen, J.
    Linke, J.
    Lungu, C. P.
    Matthews, G. F.
    Pedrick, L.
    Riccardo, V.
    Sundelin, P.
    Villedieu, E.
    PROCEEDINGS OF THE 17TH INTERNATIONAL VACUUM CONGRESS/13TH INTERNATIONAL CONFERENCE ON SURFACE SCIENCE/INTERNATIONAL CONFERENCE ON NANOSCIENCE AND TECHNOLOGY, 2008, 100
  • [2] Tritium in plasma-facing components of JET with the ITER-Like-Wall
    Pajuste, E.
    Teimane, A. S.
    Kizane, G.
    Avotina, L.
    Halitovs, M.
    Lescinskis, A.
    Vitins, A.
    Kalnina, P.
    Lagzdina, E.
    Zabolockis, R. J.
    PHYSICA SCRIPTA, 2021, 96 (12)
  • [3] PLASMA FACING MATERIALS FOR THE JET ITER-LIKE WALL
    Thomser, C.
    Bailescu, V.
    Brezinsek, S.
    Coenen, J. W.
    Greuner, H.
    Hirai, T.
    Linke, J.
    Lungu, C. P.
    Maier, H.
    Matthews, G.
    Mertens, Ph
    Neu, R.
    Philipps, V.
    Riccardo, V.
    Rubel, M.
    Ruset, C.
    Schmidt, A.
    Uytdenhouwen, I.
    FUSION SCIENCE AND TECHNOLOGY, 2012, 62 (01) : 1 - 8
  • [4] Be ITER-like wall at the JET tokamak under plasma
    Tsavalas, P.
    Lagoyannis, A.
    Mergia, K.
    Rubel, M.
    Triantou, K.
    Harissopulos, S.
    Kokkoris, M.
    Petersson, P.
    Abduallev, S.
    Abhangi, M.
    Abreu, P.
    Afzal, M.
    Aggarwal, K. M.
    Ahlgren, T.
    Ahn, J. H.
    Aho-Mantila, L.
    Aiba, N.
    Airila, M.
    Albanese, R.
    Aldred, V.
    Alegre, D.
    Alessi, E.
    Aleynikov, P.
    Alfier, A.
    Alkseev, A.
    Allinson, M.
    Alper, B.
    Alves, E.
    Ambrosino, G.
    Ambrosino, R.
    Amicucci, L.
    Amosov, V.
    Sunden, E. Andersson
    Angelone, M.
    Anghel, M.
    Angioni, C.
    Appel, L.
    Appelbee, C.
    Arena, P.
    Ariola, M.
    Arnichand, H.
    Arshad, S.
    Ash, A.
    Ashikawa, N.
    Aslanyan, V.
    Asunta, O.
    Auriemma, F.
    Austin, Y.
    Avotina, L.
    Axton, M. D.
    PHYSICA SCRIPTA, 2017, T170
  • [5] First results and surface analysis strategy for plasma-facing components after JET operation with the ITER-like wall
    Likonen, J.
    Alves, E.
    Baron-Wiechec, A.
    Brezinsek, S.
    Coad, J. P.
    Hakola, A.
    Heinola, K.
    Koivuranta, S.
    Matthews, G. F.
    Petersson, P.
    Rubel, M.
    Stan-Sion, C.
    Widdowson, A.
    PHYSICA SCRIPTA, 2014, T159
  • [6] R&D on tungsten plasma facing components for the JET ITER-like wall project
    Piazza, G.
    Matthews, G. F.
    Pamela, J.
    Altmann, H.
    Coad, J. P.
    Hirai, T.
    Lioure, A.
    Maier, H.
    Mertens, Ph.
    Philipps, V.
    Riccardo, V.
    Rubel, M.
    Villedieu, E.
    JOURNAL OF NUCLEAR MATERIALS, 2007, 367 (1438-1443) : 1438 - 1443
  • [7] Overview of tritium retention in divertor tiles and dust particles from the JET tokamak with the ITER-like wall
    Torikai, Y.
    Kikuchi, G.
    Owada, A.
    Masuzaki, S.
    Otsuka, T.
    Ashikawa, N.
    Yajima, M.
    Tokitani, M.
    Oya, Y.
    Lee, S. E.
    Hatano, Y.
    Asakura, N.
    Hayashi, T.
    Oyaidzu, M.
    Likonen, J.
    Widdowson, A.
    Rubel, M.
    NUCLEAR FUSION, 2024, 64 (01)
  • [8] Correlation of surface chemical states with hydrogen isotope retention in divertor tiles of JET with ITER-Like Wall
    Oya, Yasuhisa
    Masuzaki, Suguru
    Tokitani, Masayuki
    Azuma, Keisuke
    Oyaidzu, Makoto
    Isobe, Kanetsugu
    Asakura, Nobuyuki
    Widdowson, Anna M.
    Heinola, Kalle
    Jachmich, Stefan
    Rubelg, Marek
    Abduallev, S.
    Abhangi, M.
    Abreu, P.
    Afzal, M.
    Aggarwal, K. M.
    Ahlgren, T.
    Ahn, J. H.
    Aho-Mantila, L.
    Aiba, N.
    Airila, M.
    Albanese, R.
    Aldred, V.
    Alegre, D.
    Alessi, E.
    Aleynikov, P.
    Alfier, A.
    Alkseev, A.
    Allinson, M.
    Alper, B.
    Alves, E.
    Ambrosino, G.
    Ambrosino, R.
    Amicucci, L.
    Amosov, V.
    Sunden, E. Andersson
    Angelone, M.
    Anghel, M.
    Angioni, C.
    Appel, L.
    Appelbee, C.
    Arena, P.
    Ariola, M.
    Arnichand, H.
    Arshad, S.
    Ash, A.
    Ashikawa, N.
    Aslanyan, V.
    Asunta, O.
    Auriemma, F.
    FUSION ENGINEERING AND DESIGN, 2018, 132 : 24 - 28
  • [9] Fuel retention in JET ITER-Like Wall from post-mortem analysis
    Heinola, K.
    Widdowson, A.
    Likonen, J.
    Alves, E.
    Baron-Wiechec, A.
    Barradas, N.
    Brezinsek, S.
    Catarino, N.
    Coad, P.
    Koivuranta, S.
    Matthews, G. F.
    Mayer, M.
    Petersson, P.
    JOURNAL OF NUCLEAR MATERIALS, 2015, 463 : 961 - 965
  • [10] Structure, tritium depth profile and desorption from 'plasma-facing' beryllium materials of ITER-Like-Wall at JET
    Pajuste, E.
    Kizane, G.
    Vitins, A.
    Igaune, I.
    Avotina, L.
    Zarins, R.
    Abhangi, M.
    Abreu, P.
    Aftanas, M.
    Afzal, M.
    Aggarwal, K. M.
    Aho-Mantila, L.
    Ahonen, E.
    Aints, M.
    Airila, M.
    Albanese, R.
    Alegre, D.
    Alessi, E.
    Aleynikov, P.
    Alfier, A.
    Alkseev, A.
    Allan, P.
    Almaviva, S.
    Alonso, A.
    Alper, B.
    Alsworth, I.
    Alves, D.
    Ambrosino, G.
    Ambrosino, R.
    Amosov, V.
    Andersson, F.
    Andersson Sunden, E.
    Angelone, M.
    Anghel, A.
    Anghel, M.
    Angioni, C.
    Appel, L.
    Apruzzese, G.
    Arena, P.
    Ariola, M.
    Arnichand, H.
    Arnoux, G.
    Arshad, S.
    Ash, A.
    Asp, E.
    Asunta, O.
    Atanasiu, C. V.
    Austin, Y.
    Avotina, L.
    Axton, M. D.
    NUCLEAR MATERIALS AND ENERGY, 2017, 12 : 642 - 647