Continuous facilitated transport pathway constructed by in-situ interlinkage of mobile aniline with fixed carriers distributing along nanofibers for carbon capture

Facilitated transport membrane with fixed and mobile carriers is essential yet challenging to improve the CO2 capture. Herein, a facilitated transport membrane with continuous pathway was constructed by the in -situ interlinkage of mobile aniline with the fixed carriers distributing along electrospun polyacrylonitrile (PAN) nanofibers. In this membrane, fixed amine carriers are introduced through the alkalinous hydrolysis of PAN fibers (HPAN), and are distributed along the HPAN fibers to construct a long-range continuous transport pathway for CO2. The mobile aniline carriers are introduced into the interfibrous voids of the HPAN nanofibers mat (NFM) by in -situ polymerization of Poly (ethylene glycol) diacrylate (PEGDA), which interlink the fixed amine carriers to achieve the facilitated transport pathway continuous completely. And the fixed amine and mobile aniline carriers are demonstrated to co -exist in the An/PEO@HPAN membrane (NFCM) by the FTIR and XPS results. Meanwhile, the XRD and DSC results indicate that the introduction of aniline increases the free volume of PEO matrix, which is beneficial for enhancing CO2 permeation. Therefore, the 10 wt% An/PEO@HPAN-3h NFCM presents 90.81 % and 13.15 % increases in CO2 permeability and CO2/N2 selectivity under mixed gas at 0.3 MPa in contrast with the membrane without mobile aniline carriers. Under mixed gas conditions, this NFCM exhibits CO2 permeability of 202.93 Barrer and CO2/N2 selectivity of 83.89 at 0.1 MPa, reaching the 2019 McKeown upper bound.