Event-triggered sliding mode control for networked linear systems

This paper investigates the control-based event-triggered sliding mode control for a networked linear system whose feedback information is transmitted over a digital communication network. In this pa-per, a novel event-triggered mechanism based on control value is proposed. Different from traditional event-triggered mechanisms that are normally based on states, our mechanism pays more attention to the desired control input value of the system. When the deviation between the current control input and the control input being calculated on the basis of the previous system state exceeds a given threshold, an event is triggered. For the sake of reducing the information to be transmitted, a quantization policy is executed and only a few bits are needed to transmit the feedback symbol of each sample. The combina-tion of the control-based event-triggered mechanism and the quantization policy can significantly reduce both the transmission frequency and the number of bits of each feedback packet. For the concerned system, sliding mode control is implemented. The reachability of the sliding mode surface and the robust stability of the system are analyzed by fully taking quantization effects into account. Moreover, the effects of transmission delay of feedback packets on the event-triggering mechanism are considered. Under the proposed mechanism, the lower bound of event intervals is proven to be non-zero, i.e., the Zeno behavior is excluded. Simulations of a mechanical system are done to further verify the superiority of the proposed mechanism.(c) 2023 The Franklin Institute. Published by Elsevier Inc. All rights reserved.