Valorisation of crude glycerol in the production of liquefied lignin bio-polyols for polyurethane formulations

Bio-polyols, produced by liquefying lignin with polyhydric alcohols, offer a promising alternative to conventional polyols for polyurethane production. To enhance the sustainability on the production of these bio-polyols, this study proposes the use of crude glycerol and microwave-assisted liquefaction as substitutes for conventional methods and commercial glycerol. This approach reduces the energy requirements of the reaction while also adding value to this by-product. The synthesis of bio-polyols with suitable properties to produce elastic and rigid polyurethane was carried out using previously optimised reaction conditions. Organosolv lignins obtained from Eucalyptus globulus and Pinus radiata were employed, using polyethylene glycol and crude glycerol as solvents and sulphuric acid as a catalyst. Several parameters of the bio-polyols were analysed, including hydroxyl number (IOH), acid number (An), and functionality (f), suggesting that the bio-polyols were suitable for polyurethane synthesis. Bio-polyols formulated to produce rigid polyurethanes exhibited IOH values of 554 and 383 (mg KOH/ g), An values of 1.91 and 4.21 (mg KOH/g), and functionalities of 4.16 and 3.14 for Eucalyptus globulus and Pinus radiata lignin. In the case of bio-polyols for elastic polyurethanes, the values were 228 and 173 (mg KOH/g) (IOH), 20.94 and 25.09 (mg KOH/g) (An), and functionalities of 3.51 and 2.08.