Diagnostics using a physics-based engine model in aero gas turbine engine verification tests

In the present study, the application of a diagnostic method using a physics-based model is proposed during engine verification testing. A physics-based engine model is constructed, based on a 0-dimensional system analysis method, and then revised through performance adaptation with a basic engine model. Adaptation factors are used for the compressor, secondary air system, nozzle, exhaust gas temperature, and engine thrust. Gas path analysis is conducted using the physics-based engine model and the performance test data in real time. A health parameter that can quantitatively evaluate the performance difference of components was defined. Health parameters for the compressor capacity and efficiency, secondary air system, and nozzle are calculated from the gas path analysis. The multi-variable Newton- Raphson method is employed for the performance adaptation and gas path analysis in real time. A single -shaft gas turbine engine, which is constructed based on the core part of a turbofan engine currently under development, is utilized to test and evaluate the effectiveness of the proposed method. Three tests are performed for engine verification. The proposed diagnostic method is applied to the aero gas turbine engine verification test. In 33 test cases, the fault detection rates for the compressor's variable guide vane, secondary air system, and variable area nozzle are 100%, 91%, and 79%, respectively. As a result, it is confirmed that the proposed method can simultaneously detect abnormalities in the compressor's variable guide vane, secondary air system, and variable area nozzle. In addition, this study indicates that applying the physics-based engine model to the diagnostics logic can effectively detect failures with a small amount of data.(c) 2023 Elsevier Masson SAS. All rights reserved.