Experimental and numerical analysis of a CO2 dual-source heat pump with PVT evaporators for residential heating applications

Multi-source energy systems are a promising solution to lower the environmental impact of the heating and cooling sector and enhance the exploitation of renewable energy sources. In this context, dual-source solarassisted heat pumps exploit solar energy and air as the low-temperature heat sources. However, the efficiency of solar-based systems is strictly related to weather conditions, location, and time. Therefore, there is a need for accurate models to be used in dynamic simulations of these systems and perform detailed performance analyses and study the involved energy flows. This paper presents an experimental and numerical investigation of a direct-expansion solar-assisted heat pump (DX-SAHP) operating with CO2 as the refrigerant. The heat pump prototype can work with an air-finned coil heat exchanger or photovoltaic-thermal (PVT) solar collectors as the evaporator. The solar-mode configuration allows the exploitation of the heat from solar radiation to evaporate the refrigerant and to improve the photovoltaic electricity production due to the cooling of the cells up to 8%. A numerical heat pump model, integrated with novel gas-cooler and PVT collectors models, has been developed and implemented as a TRNSYS type for dynamic simulations of the system. The model has been validated with continuous measurements during the heat pump operation in solar and air modes. The proposed model can be used for performing seasonal simulations of a heat pump operating with a transcritical CO2 cycle. Moreover, the outcomes of the analysis show how the configuration of a CO2 heat pump with a direct-expansion air-finned coil heat exchanger or PVT can be used to enhance the performance of the heat pump and increase the electrical efficiency of the photovoltaic cells.