Experimental research on a propeller blade fertilizer transport device based on a discrete element fertilizer block model

被引:8
|
作者
Chen, Guibin [1 ,2 ]
Wang, Qingjie [1 ,2 ]
Li, Hongwen [1 ,2 ]
He, Jin [1 ,2 ]
Lu, Caiyun [1 ,2 ]
Xu, Dijuan [3 ]
Sun, Mengyao [4 ]
机构
[1] China Agr Univ, Coll Engn, Beijing 100083, Peoples R China
[2] Minist Agr & Rural Affairs, Key Lab Agr Equipment Conservat Tillage, Beijing 100083, Peoples R China
[3] Beijing Vocat Coll Agr, Beijing 100085, Peoples R China
[4] Beijing Agr Machinery Expt Appraisal Extens Stn, Beijing, Peoples R China
基金
中国国家自然科学基金;
关键词
Propeller blade; Organic fertilizer; Discrete element; Simulation; Structural optimization; SIMULATION; DEM; OPTIMIZATION; SOIL;
D O I
10.1016/j.compag.2023.107781
中图分类号
S [农业科学];
学科分类号
09 ;
摘要
In organic fertilizer application, it is difficult for existing chain-type fertilizer transport devices to cut and break organic fertilizer blocks during operation. The fertilizer transport process does not effectively disturb the fer-tilizer group, and it is easy to cause fertilizer overhead, which makes the subsequent fertilizer spreading and deep application process unable to operate normally. In addition, the lack of a solid organic fertilizer numerical simulation model restricts the innovation of organic fertilizer application equipment. Because of the above problems, based on the physical characteristics of the manure, this paper establishes a simulation model of a manure block through the Hertz-Mindlin with bonding (HMB) contact model in the discrete element method (DEM), calibrates the bonding parameters of the organic fertilizer by combining the uniaxial compression physical test and the simulation test, and verifies the calibrated bonding parameters by the load-displacement test and the deformation test of organic fertilizer. Through parameter optimization, the unit normal stiffness (UNS) is 11.27 x 107N/m3, unit shear stiffness (USS) is 4.17 x 107N/m3, critical normal stress (CNS) is 3.40 MPa, critical shear stress (CSS) is 1.25 MPa, and bonding radius (BR) is 2.80 mm. The relative error of the maximum load (ML) is 8.7%, and the relative error of the displacement is 3.2%, as verified by the bench test. This paper proposes a propeller blade (PB)-type organic fertilizer crushing and transporting device, and the structural parameters of the PB are simulated based on the calibrated organic fertilizer model. The optimal parameter combination after the optimization of the PB is obtained as follows: the blade inclination angle is 42 degrees, the blade spacing is 227 mm, the blade speed is 89 r/min, and the blade height is 205 mm. The machine is processed, and the field test is carried out. The results show that the average oil pressures of the stable fertilizer crushing process under the half-speed and full-speed modes are 11.06 MPa and 12.01 MPa, respectively. The minimum oil pressure is 8.89 MPa and 10.90 MPa, respectively, the average energy consumption is 2.71 kW and 5.42 kW, respectively, and the proportion of the particle size of the organic fertilizer after crushing is more significant than 92.4%. The quality of the crushed fertilizer is high and can be used in crushed fertilizer applications.
引用
收藏
页数:19
相关论文
共 50 条
  • [1] Optimization and Experimental Study of Operation Parameters for Fertilizer Injection Drilling Device Based on Discrete Element Simulation
    Liu, Heng
    Xu, Wenzhi
    Yuan, Quanchun
    Zeng, Jin
    Lei, Xiaohui
    Lyu, Xiaolan
    [J]. APPLIED SCIENCES-BASEL, 2024, 14 (06):
  • [2] OPTIMIZATION RESEARCH OF FERTILIZER GUIDING MECHANISM BASED ON THE DISCRETE ELEMENT METHOD
    Zhang, Hong Jian
    Li, Yu Feng
    Xu, Chun Bao
    Liu, Shuang Xi
    Quan, Ze Kun
    Wang, Jin Xing
    [J]. INMATEH-AGRICULTURAL ENGINEERING, 2020, 60 (01): : 275 - 286
  • [3] DESIGN OF ORCHARD FERTILIZER-SOIL MIXING DEVICE BASED ON DISCRETE ELEMENT METHOD
    Zhang, L. P.
    Niu, X. T.
    Zheng, W. Q.
    Cui, Z. H.
    [J]. INTERNATIONAL JOURNAL OF SIMULATION MODELLING, 2024, 23 (01) : 125 - 136
  • [4] Parametric optimization and experimental verification of multi-fertilizer mixing by air blowing and blade stirring based on discrete element simulations
    Xi, Xiaobo
    Wang, Runyin
    Wang, Xintong
    Shi, Yangjie
    Zhao, Ying
    Zhang, Baofeng
    Qu, Jiwei
    Gan, Hao
    Zhang, Ruihong
    [J]. COMPUTERS AND ELECTRONICS IN AGRICULTURE, 2023, 210
  • [5] Design and Experiment of Corn Layer Fertilization Device with Fertilizer Flow Reconstruction Based on Discrete Element Method
    Wang, Shoujiang
    Yan, Bingxin
    Li, Liwei
    Dong, Jianjun
    Wu, Guangwei
    [J]. Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, 2024, 55 (09): : 138 - 150
  • [6] Parameter calibration for the discrete element simulation model of commercial organic fertilizer
    Xie, Can
    Yang, Jingwei
    Wang, Baoshuai
    Zhuo, Peng
    Li, Chengsong
    Wang, Lihong
    [J]. INTERNATIONAL AGROPHYSICS, 2021, 35 (01) : 107 - 117
  • [7] Discrete Element Method-Based Hybrid Compartment Model of a Rotary Dryer for Fertilizer Production
    Prieto-Garcia, Maria
    Hernandez, Borja
    Sanz, Carlos
    Marcos, Jennifer
    Sanchez, Jose L.
    Grondona, Isabel
    Martin, Mariano
    [J]. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2024, 63 (19) : 8713 - 8728
  • [8] Design Optimization and Experimental Verification of Spiral Cone Centrifugal Fertilizer Apparatus Based on the Discrete Element Method
    Liu, Xiaodong
    Lu, Qingqing
    Li, Guangxi
    Wang, Jianbo
    Yan, Dongwei
    Yang, Liquan
    Liu, Erbo
    [J]. PROCESSES, 2023, 11 (01)
  • [9] Design and Test of Disturbed Fertilizer Strip-Ejection Device with Vertical Pendulum Bar Based on Discrete Element Method
    Chen, Lintao
    Deng, Xiangwu
    Liu, Zhaoxiang
    Mou, Xiangwei
    Ma, Xu
    Chen, Rui
    [J]. AGRICULTURE-BASEL, 2024, 14 (04):
  • [10] Optimization design of fertilizer apparatus owned arc gears based on discrete element method
    Dun, Guoqiang
    Gao, Zhiyong
    Liu, Yuxuan
    Ji, Wenyi
    Mao, Ning
    Wu, Xingpeng
    Liu, Wenhui
    [J]. INTERNATIONAL JOURNAL OF AGRICULTURAL AND BIOLOGICAL ENGINEERING, 2021, 14 (02) : 97 - 105