Boosting the catalytic performance of Fe/Zr catalyst by tungsten addition for selective catalytic reduction of NOx with ammonia

To clarify the effect of WO3 doping over Fe/Zr catalyst, several Fe/Zr-xW catalysts were prepared via conven-tional wet impregnation method, and the selective catalytic reduction (SCR) performance was studied. The Fe/ Zr-0.1 W catalyst showed the highest catalytic activity and achieved nearly 100 % in a wide operating tem-perature window of 300-500 degrees C, and the N2 selectivity exceeded 90 % over the entire temperature range under a high hour space velocity of 90, 000 h-1. In addition, Fe/Zr-0.1 W catalyst also exhibited superior resistance to SO2 compared to Fe/Zr catalyst without WO3 introduction. Further characterization results indicated that the Fe/ Zr-0.1 W catalyst possessed larger BET specific surface area, better dispersion of active component, higher concentration of Fe3+ and more surface chemisorbed oxygen species, which might be the predominant factors for its superior catalytic performance. More importantly, WO3 doping improved the redox capacity and surface acidity, thus promoting the redox circle and enhancing the adsorption ability of NH3. According to the transient in-situ DRIFTS experiment results, the doping of WO3 increased the L-H reaction pathway on the surface of Fe/Zr catalyst during the NH3-SCR reaction. The present work could provide a new way for developing a high-performance non-vanadium SCR catalyst in practical application.