Investigation of nanoscale strain fields induced by the L12-Al3Zr phase in Al-Zn-Mg-Cu alloys

被引:0
|
作者
Hou, Xiaohu [1 ]
Sun, Shuli [1 ]
Bai, Pucun [1 ]
Zhao, Xueping [1 ]
Lang, Fengchao [2 ]
Li, Bo [3 ]
机构
[1] Inner Mongolia Univ Technol, Coll Mat Sci & Engn, Hohhot, Peoples R China
[2] Inner Mongolia Univ Technol, Coll Sci, Hohhot, Peoples R China
[3] Xi An Jiao Tong Univ, Sch Mat Sci & Engn, State Key Lab Mech Behav Mat, Xian, Peoples R China
基金
中国国家自然科学基金;
关键词
Electron microscopy; Aluminum alloys; Microstructure; L12-Al3Zr phase; Strain field; DISPLACEMENT; BEHAVIOR;
D O I
10.1016/j.matlet.2024.135933
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Al-Zn-Mg-Cu alloys are widely used in aerospace as an advanced lightweight structural material. The precipitation of the nanoscale L12-Al3Zr phase enhances the mechanical properties of the alloy. This study employs scanning transmission electron microscopy and geometric phase analysis techniques to investigate the strain fields induced by the nanoscale L12-Al3Zr phase. The findings demonstrate that after the precipitation of the L12-Al3Zr phase, the strain within the L12-Al3Zr phase is negligible, and a coherent strain field is developed near the L12-Al3Zr/Al interface. Characterizing the coherent strain fields of the nanoscale L12-Al3Zr phase provides a valuable reference for optimizing the mechanical properties of Al alloys.
引用
收藏
页数:4
相关论文
共 50 条
  • [1] Microstructure evolution and thermal stability of L12-Al3Zr dispersoids in Al-X-Zr (X = Cu, Zn, Mg) aluminum alloys
    Wan, Bin
    Li, Fengman
    Ehlers, Flemming J. H.
    Weng, Yaoyao
    Wang, Chenglin
    Ding, Lipeng
    Jia, Zhihong
    MATERIALS CHARACTERIZATION, 2024, 215
  • [2] Evaluation of strain fields caused by the η′ phase in an Al-Zn-Mg-Cu alloy
    Hou, Xiaohu
    Bai, Pucun
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 683 : 90 - 93
  • [3] Effects of Zr-addition on intergranular fracture of Al-Cu-Mg and Al-Zn-Mg-Cu alloys
    Ohte, Rina
    Yoshioka, Koji
    Uesugi, Tokuteru
    Takigawa, Yorinobu
    Higashi, Kenji
    Keikinzoku/Journal of Japan Institute of Light Metals, 2019, 69 (04): : 235 - 241
  • [4] Optimizing Size and Number Density of Al3Zr Dispersoids in Al-Zn-Mg-Cu Alloys
    Honaramooz, Mohammad Taha
    Morak, Roland
    Paris, Oskar
    ADVANCED ENGINEERING MATERIALS, 2024, 26 (19)
  • [5] Effects of the coherency of Al3Zr on the microstructures and quench sensitivity of Al-Zn-Mg-Cu alloys
    Pan, Tse-An
    Tzeng, Yu-Chih
    Bor, Hui-Yun
    Liu, Kuang-Hui
    Lee, Sheng-Long
    MATERIALS TODAY COMMUNICATIONS, 2021, 28
  • [6] Investigation of Strain Field of Precipitates in an Al-Zn-Mg-Cu Alloy
    Liu Fei
    Bai Pueun
    Hou Xiaohu
    Zhao Chunwang
    Xing Yongming
    RARE METAL MATERIALS AND ENGINEERING, 2012, 41 : 520 - 523
  • [7] Environmental embrittlement of Al-Zn-Mg-Cu alloys with Cr or Zr.
    Satoh, S
    Kanno, M
    THERMEC'2003, PTS 1-5, 2003, 426-4 : 345 - 350
  • [8] The microstructure of rapidly solidified Al-Zn-Mg-Cu alloys with Zr addition
    Litynska-Dobrzynska, Lidia
    Ochin, Patrick
    Goral, Anna
    Faryna, Marek
    Dutkiewicz, Jan
    APPLIED CRYSTALLOGRAPHY XXI, 2010, 163 : 42 - +
  • [9] The effects of Cu, Zn and Zr on the solution temperature and quenching sensitivity of Al-Zn-Mg-Cu alloys
    Chiu, Yang-Chun
    Du, Kun-Ting
    Bor, Hui-Yun
    Liu, Guang-Hui
    Lee, Sheng-Long
    MATERIALS CHEMISTRY AND PHYSICS, 2020, 247
  • [10] Investigation of the Coherent Strain Evolution of the η′ phase in Al-Zn-Mg-Cu alloys via scanning transmission electron microscopy
    Hou, Xiaohu
    Ma, Guoxi
    Bai, Pucun
    Lang, Fengchao
    Zhao, Xueping
    Liu, Fei
    Xing, Yongming
    JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 856