Preparation and Combustion Mechanism of Boron-Based High-Energy Fuels

Due to the characteristics of high energy density and a high calorific value, boron has become a high-energy fuel and shows great potential to be a high-performance candidate for propellants. However, the wide applications of boron are still limited by the characteristics of easy oxidization, ignition difficulty, a long combustion duration, and combustion products that readily adhere to the surface and inhibit full combustion. Therefore, how to overcome the shortcomings and improve the combustion efficiencies of boron-based fuels have become the highlights in exploring novel high-performance energetic materials. In this paper, the prevalent preparation methods and the corresponding combustion mechanisms of boron-based energetic materials are briefly summarized. The results showed that the boron-based energetic materials can be prepared by surface coating, mechanical milling, and ultrasonic mixing methods. At the same time, the corresponding ignition delay and combustion efficiency were also analyzed according to different combustion tests. The results showed that the boron-based composites with different additives had different combustion characteristics. The combustion of boron-based energetic materials can be optimized by removing surface oxide layers, providing extra heat, inhibiting the formation of or the rapid removal of the combustion intermediates, and increasing the diffusion rate of oxygen. With the improvement of the combustion efficiency of boron-based energetic materials, boron-based high-energy fuels will become more and more widely adopted in the future.